Search found 40 matches
- Fri Jun 26, 2020 8:21 pm
- Forum: Template Library
- Topic: Nihui U807 Template
- Replies: 0
- Views: 9123
Nihui U807 Template
Hi! Recently I've swapped my Walkera 8S (DeviationTX) for a Jumper T16 (OpenTX) and I can't translate the Nihui U807 model to the new system....I've managed to rebuild the airplane modesl only.... I've attached the model.ini file to the post (Could be viewed with a TXT editor) Any help? Could some o...
- Wed Apr 17, 2013 7:59 am
- Forum: er9x
- Topic: Mix for 4ch Helicopter
- Replies: 4
- Views: 3415
Re: Mix for 4ch Helicopter
Hi !
Thanks for the info, I don't noticed that the mix was only working for the ID0 mode Now I've changed it into the correct position
I'm on r788 , I'm gonna change the throttle from 125 to 100 also to get the full throttle at the end of the stick
Cheers
Thanks for the info, I don't noticed that the mix was only working for the ID0 mode Now I've changed it into the correct position
I'm on r788 , I'm gonna change the throttle from 125 to 100 also to get the full throttle at the end of the stick
Cheers
- Tue Apr 16, 2013 7:00 pm
- Forum: er9x
- Topic: er9x Filter removed?
- Replies: 3
- Views: 2727
Re: er9x Filter removed?
Ok, thanks for the info
- Tue Apr 16, 2013 6:43 pm
- Forum: er9x
- Topic: Mix for 4ch Helicopter
- Replies: 4
- Views: 3415
Re: Mix for 4ch Helicopter
Hi, this its my setup.... CH01 (+100%)Ail * (+100%)CH06 CH02 (+100%)Ele * (+100%)CH06 CH03 (+125%)Thr Switch(ID0) Curve(Curve 1) (+10%)Ele Switch(ELE) R (+125%)Thr Switch(!ID0) Curve(Curve 2) R (-100%)MAX Switch(THR) CH04 (+100%)Rud * (+100%)CH05 CH05 R (+50%)P1 Offset (100%) CH06 R (+50%)P3 Offset ...
- Tue Apr 16, 2013 6:19 pm
- Forum: er9x
- Topic: Mix for 4ch Helicopter
- Replies: 4
- Views: 3415
Mix for 4ch Helicopter
Hi, I've made a model profile for a 4Ch Helicopter (V911) and I've noticed that when the heli goes forward its needs a bit more throttle 'cause the main rotor speed goes down a bit, I've red that its normal so to compensate the effect I've added a mix to the channel 3 (TRH), when I press the ELV Swi...
- Fri Apr 12, 2013 4:33 pm
- Forum: er9x
- Topic: er9x Filter removed?
- Replies: 3
- Views: 2727
er9x Filter removed?
Hi, looking into the radiuo setup menus of my 9x I cant find the Filter option... Has been removed? I'm using the r788...
Thanks in advance.
Thanks in advance.
- Wed Apr 10, 2013 3:08 pm
- Forum: er9x
- Topic: HT8 (Hisky Module) + er9x
- Replies: 5
- Views: 5508
Re: HT8 (Hisky Module) + er9x
Hi !
Thanks for your inputs
The problem was in the protocol...now using PPMSIM works like a charm.
Thanks again for your help
Thanks for your inputs
The problem was in the protocol...now using PPMSIM works like a charm.
Thanks again for your help
- Tue Apr 09, 2013 2:37 pm
- Forum: er9x
- Topic: HT8 (Hisky Module) + er9x
- Replies: 5
- Views: 5508
HT8 (Hisky Module) + er9x
Hi ! I've sucesfully binded my FBL100 with my 9x using the HT8 module from Hisky, but I need to remove the 9x radio module everytime i want to plug the HT8...otherwise the HT8 doesn't works.... I've used the PPMSIM option in the radio setup but doesn't works.... Any ideas? BTW I've not done the resi...
- Fri Mar 08, 2013 12:15 pm
- Forum: Template Library
- Topic: Template WL v911
- Replies: 18
- Views: 19549
Re: Template WL v911
Hi, I've download this template and want to know if the P2 works as the mode 1/2 button on the original radio.
Thanks in advance.
Thanks in advance.
Re: PPMSIM
Hi, thanks for the info. I'll try using the PPMSIM option in the model setup.
PPMSIM
Hi, I've a friend who wants to start flying an Ezstar. Hi has bought a 9x radio like mine and need to know if I can use my radio as master using a 3.5mm cable conected to his radio. I've seen that it's not necesary to modify the radio with the 1k resistor since I can set the output to PPMSIM but I n...
- Wed Feb 20, 2013 8:15 pm
- Forum: openTx
- Topic: Open9x merge models
- Replies: 1
- Views: 1965
Re: Open9x merge models
Uuuuuupppps
I've discovered the way.... I gonna post the solution here 'cause could be usefull for another member...
Just open the 2 files and pick the model you want to copy and drag on your existing model window....
I've discovered the way.... I gonna post the solution here 'cause could be usefull for another member...
Just open the 2 files and pick the model you want to copy and drag on your existing model window....
- Wed Feb 20, 2013 8:13 pm
- Forum: openTx
- Topic: Open9x merge models
- Replies: 1
- Views: 1965
Open9x merge models
Hi there ! I've my eprom models file with all my Planes models but now I want to include another model (an Heli) from a file who a pal sent me by email. Could be possible to merge 2 files? I dont know if its possible, just wondering if i can "bypass" the process of copying the heli setting...
- Wed Feb 20, 2013 4:18 pm
- Forum: openTx
- Topic: Dual rates and mix
- Replies: 3
- Views: 2721
Re: Dual rates and mix
Yeah, I took a look before the take off and was clear but sudenly a bush was in the middle !!!! :lol: It's the price i have to pay 'cause I'm a newbie :D Thanks for the imputs, I've check the instructions of gohsthb and works like a charm !!! Now it's time to check it on the fly field....hope not to...
- Wed Feb 20, 2013 11:53 am
- Forum: openTx
- Topic: Dual rates and mix
- Replies: 3
- Views: 2721
Dual rates and mix
Hi again, I managed to set up the radio :) thanks to jhsa and Romolo. I prepared the 9x for my little P47 Thunderbolt and it was fine until a bush appeared in my way and the little bird crashed against the ground :lol: http://imageshack.us/a/img850/228/img20130216103340.jpg But now it's fixed and re...
- Thu Jan 31, 2013 12:13 pm
- Forum: openTx
- Topic: Template for Easy Star
- Replies: 4
- Views: 3828
Re: Template for Easy Star
Hey !!! thanks for your help ! :) Everything its working now !!!!! Don't blame on me.... after checking all of your inputs and setting the radio as you told me I've realized that I've not calibrated the radio...... :lol: You're right , the better way to learn its going to the fields and asking peopl...
- Thu Jan 31, 2013 9:58 am
- Forum: openTx
- Topic: Template for Easy Star
- Replies: 4
- Views: 3828
Template for Easy Star
Hi :) I came from another type of radio (FlySky 6b) and need to set up a template for my Easy Star... I've tried to make by myself but can't get to put all in working order.... I need to prgramm the radio to get... If I move the AIL stick in one direcction one of the ailerons must go down and the ot...
- Wed Dec 19, 2012 8:43 am
- Forum: er9x
- Topic: Light switch not working
- Replies: 4
- Views: 3455
Re: Light switch not working
Thanks !!! Now working
- Tue Dec 18, 2012 1:37 pm
- Forum: er9x
- Topic: Light switch not working
- Replies: 4
- Views: 3455
Re: Light switch not working
Hi
I used the Hobbyking connection, no FET connected to pin 17....Just using the HK connector... ¿?
http://www.hobbyking.com/hobbyking/stor ... LCD-BL.jpg
Thanks in advance.
I used the Hobbyking connection, no FET connected to pin 17....Just using the HK connector... ¿?
http://www.hobbyking.com/hobbyking/stor ... LCD-BL.jpg
Thanks in advance.
- Tue Dec 18, 2012 11:46 am
- Forum: er9x
- Topic: Light switch not working
- Replies: 4
- Views: 3455
Light switch not working
Hi, I'm a newbie and I've progrramed my radio to switch the light on and off using the AIL switch but it doesnt works. I've installed the HobbyKing LCD backlinght.....
Any ideas?.
Thanks in advance.
Any ideas?.
Thanks in advance.
- Wed Nov 21, 2012 1:04 pm
- Forum: Hardware
- Topic: Dead after flashing
- Replies: 41
- Views: 17757
Re: Dead after flashing
Rob Thomson wrote:Check the custom functions. There is an instant trim function.
Thnx done
- Wed Nov 21, 2012 1:04 pm
- Forum: Hardware
- Topic: Dead after flashing
- Replies: 41
- Views: 17757
Re: Dead after flashing
jhsa wrote:I live in Germany pero soy portugues..solmer wrote:Thanks !!!! Vielen Dank
Sorry, sooo Obrigado We're neighbours
- Wed Nov 21, 2012 12:51 pm
- Forum: Hardware
- Topic: Dead after flashing
- Replies: 41
- Views: 17757
Re: Dead after flashing
BTW.... I know this its not the correct forum to ask about the open9x but....does anybody knows how to trim a plane just using one of the switchs? I've read in another forum (I dont remember where) about trimming an airplane just trimming it and then pressing / activating one of the switch... Thanks...
- Wed Nov 21, 2012 12:48 pm
- Forum: Hardware
- Topic: Dead after flashing
- Replies: 41
- Views: 17757
Re: Dead after flashing
Thanks !!!! Vielen Dank
- Wed Nov 21, 2012 11:34 am
- Forum: Hardware
- Topic: Dead after flashing
- Replies: 41
- Views: 17757
Re: Dead after flashing
:D :D :D :D :D :D Belive it or not....It's working again !!!!!! Tried the oscillator method.....X doesn't works.... :? Re-check wires....................X doesn't works... :? Removed Atmega64 and replaced with a new one.... WORKS!!!!! :lol: It was a bit hard since I don't have the proper tools so I'...
- Tue Nov 20, 2012 12:26 pm
- Forum: Hardware
- Topic: Dead after flashing
- Replies: 41
- Views: 17757
Re: Dead after flashing
Hi, my progresssssss today I'm gonna get the 1Mhz oscillator, went last Monday but the sales man told me they run out of stock. I'll post the result tomorrow, anyway I've got a new Attmega64 to replace in case the 1Mhz doesnt works....
Stay tuned
Stay tuned
- Mon Nov 19, 2012 11:51 am
- Forum: Hardware
- Topic: Dead after flashing
- Replies: 41
- Views: 17757
Re: Dead after flashing
Hi, the orange wire (SCK) its soldered to the 6th resistor from the right, so I think its corrent, isn't it?
a picture with the sold. point... The circle its where the SCK its soldered, the red X its the wrong pad...
a picture with the sold. point... The circle its where the SCK its soldered, the red X its the wrong pad...
- Mon Nov 19, 2012 11:40 am
- Forum: Hardware
- Topic: Dead after flashing
- Replies: 41
- Views: 17757
Re: Dead after flashing
Hi, I think they are short enought 7cm...Rob Thomson wrote:How long are your leads from the board to the USBasp device?
Believe you should keep these as short as possible.
- Mon Nov 19, 2012 9:25 am
- Forum: Hardware
- Topic: Dead after flashing
- Replies: 41
- Views: 17757
Re: Dead after flashing
Your board is a so called version1 with the pad of the orange wire in the wrong place. Orange wire must be connected to the 6th processor pin from rigth side Reinhard Hi, yes its a V1 ant the orange wire goes to 6th pin from the right, the picture its not so clear but I've checked it and the connec...
- Mon Nov 19, 2012 8:39 am
- Forum: Hardware
- Topic: Dead after flashing
- Replies: 41
- Views: 17757
Re: Dead after flashing
Good morning :) Here are the pics from my mainboard, I've got it with my cellular, but I think they are clear enough to see the wires.... http://imageshack.us/a/img801/8108/img20121119092933.jpg http://imageshack.us/a/img593/1852/img20121119092849.jpg I've re-checked the connections again and everyt...