openrcforums

Hi, Thanks in advance!! ive got myself rather confused and hope this aint too long winded... I recently modified my Turnigy 9X with the DHT frsky module and am using a D8R-XP receiver. I am using a Tarot 450 with a Brain 2 FBL and YEP45A esc. I am having great difficulty understanding the mixes and ...

Awesome thanks heaps!! that was it. Dont know how i managed that thought i checked it...

Thanks for the reply Mike, this does sound like its possible and would make sense. The aileron switch actually functions as the thr swich ie as throttle cut in my setup. I attached a pic of the mod i followed. The only difference being i have a smartieboard installed without telemetryEZ so i connect...

I just tried installing ER9X-Frsky and the problem still exists with switch reversal. No problems upgrading firmware on eepe.

Hi Everyone, Thanks in advance! I am stumped, i have recently installed the DIY DHT frsky mod including telemetry. I am however having a couple problems... Firstly i can only install firmware using the older companion 9x it does not work with Companion 2.1, it checks but does not write. No really a ...

Thanks! is this the correct link for the mod? http://openrcforums.com/wiki/index.php/How_to_modify_your_9x_to_support_telemetry also found this youtube video https://www.youtube.com/watch?v=pUdJwiltog0&t=115s ignoring the parts other than the diy frsky mod, theres part 2 also but seems very deta...

HI i just had a question regarding using the DHT DIY module with the original smartieboard in a Turnigy 9X. It is running ER9X and has the backlight installed. Where do i connect the telemetry, I dont thave the smartieboard telemetryEZ which is no longer available and was hoping to do it without it?...

Hi, Sorry i know theres lots on this but too much and im really confused haha I have a turnigy 9X its moded with the original smartieboard and running er9x atm Im looking to upgrade the module partly for allowing higher voltages for servos and for telemetry options, My choices i can see are the XJT,...

Sry for late response. Thanks heaps for your help gonna take it for a fly this weekend.

Is it true that the slow start on the esc ( im using the yep 45amp) can have an effect on the rpm in idle modes no matter the curve setting?

Sry i just noticed that that the changes you suggested above are not saved in this file as i did them on the transmitter. Thanks again.

Thankyou so much for your help gohst,
Attached is my eepe file.

Thanks for your help Gohst! I changed it as you said but still the throttle is not changing its more like a flat line with ID2 at a higher percent (sightly faster), stick movement on throttel does nothing to rpm on ID1 and ID2. ALso with my curve1 as it is with negitives whats the effect of this? I ...

Hi, I have a turngy 9x with smartieboard and er9x, i havent used it for a year but have recently built a tarot 450 pro V2 with a tarot xyz and having some problems with throttle. No matter what i do i cnat get the throttle curves to control throttle like it should.... no zero throttle at mid stick (...

Thanks so much for the replys! been a bit busy but will try this week. Will let you know how it goes.
Thanks again much appreciated

Hi, im new to er9x, got everything working on my 450heli except the tail mixing... Ive tried a few diff ones from the templates linked off a few posts here but must be doing something wrong... I wont to be able to set the gyro gain on a pot first and then set it in later when i work out what i need....

Thanks, got it sorted simple as reversing a few channels.
Cheers!

Hey, im really lost, i have a Belt cp V2 ( i kno i should upgrade) and have the turnigy 9X with ER9X, Ive programmed a setup for my heli based on a youtube video but my pitch is doing strange things....the ailerons seem to work fine and so does rudder. But when i increase my throttle my swash moves ...