openrcforums

It would be good if Sreeshot were stored in a folder and not in the root of the SD. It makes a mess.

Is something new waiting for us? New version?

MikeB wrote: ↑Thu Jun 23, 2022 10:39 pm The module revisions are only displayed if you ask for them by highlighting the "Hardware" item then pressing ENTER.

Mike

OK. Sometimes the problem is a bit with the conversation. English is not my mother tongue.

For me like this:

A simple test is to enable the internal module, in ACCESS mode, then select the "Hardware" item in the menu . If the module is powered OK, then you should see the hardware and software revisions and the module type displayed. Mike I thought a revision would appear under "Hardware"...

Nothing to me.

So far, so good

Narcis wrote: ↑Mon Jun 13, 2022 8:47 pm I tested Audiotest10.
It plays files but only after I run Audiotest2.

B72991C1-74B9-4497-847A-4F177A513E51.jpeg

That is known.
It still needs to be fine-tuned and a new version released.

There is a control option where a LONG press of ENTER acts as EXIT (RTN button). This may be disabled in the "RADIO SETUP|General" menu ("No ENC. as EXIT"). Tick this box then a LONG press of ENTER will select the file. I will fix it so a LONG press of ENTER always selects the f...

Model Setup/General/Voice File..................cannot be selected

Will the keyboard pop up with a short selection?

I use the Model Setup / VoiceAudio menu Short press ENTER to play the file (OK) A long press ENTER will return me to the voice file selection, but it will remain empty. (not selected) It depends on the File Type. ............................................................. Effect... OK SysName........

I've posted a new test version (AudioTest10) that drives the "mute" signal correctly (same as Audio Test 2). This should(!) play audio correctly. With SDtest9 flashed, if you use "Audio Test 2", this should remove the mute signal, so audio should play after that until you power ...

Screenshot after test:
Audio Test2 plays the tone.
Audio Test1 is silent.

"SDtest9"
....................................................
I inserted the original SD card (class 10).
Set Switch Screenshot. (rough choice)
Screenshot works.
Audio Test2 plays the tone.
Audio Test1 is silent.

I posted a SDtest8 with a longer timeout. It would be useful to know if this works with the original SD card. Mike I will test when more changes (corrections) are made. (sound fix) I don't want to keep swapping the SD card in Tx and messing up the SD reader. I've done it at least 20 times. Or is it...

Have you tried SDtest8 with the original SD card? The screenshot takes several seconds to write to the SD card, and the screen image has to be fixed while that is done. I'm looking to see why the audio is not sounding. Mike Not. Screenshots are now with the new faster card. I tried SDtest7 with the...

Choosing a screenshot switch cuts a bit.
Statistics window 6/8 freezes.

"SDtest8" Success! *It's already working. I bought SD Verbatim Pro microSDHC 32GB UHS-I V30 U3 (90R / 45W) https://www.verbatim.com/prod/flash-memory/memory-cards/pro-microsdhc/pro-microsdhc/ It would also like to fine-tune it for a standard SD card with a write of 10 MB / s. *Only sound d...

MikeB wrote: ↑Wed Jun 08, 2022 7:47 pm I assume the audio works correctly, for both of you, when you run ETHOS.

Mike

Yes, it works

Narcis wrote: ↑Wed Jun 08, 2022 3:07 pm This is my sd card

Thank you and it helped me.
I apologize for the bad English
But I meant SD content.

All works fine except voice. And what about the screenshot? When I set the switch everything goes wrong. In my transmitter works fine. I set the screenshot switch, activate several times, changed model settings (two models), changed displays, switched off the transmitter… all were saved. Please ask...

Narcis wrote: ↑Tue Jun 07, 2022 10:03 pm All works fine except voice.

And what about the screenshot? When I set the switch everything goes wrong.

(Do you hear anything from the audio, particularly just at the end of the "STARTING" screen is there a "click")
No, I can't hear.
I added a DEBUG photo

MikeB wrote: ↑Tue Jun 07, 2022 4:05 pm OK, new test version. This reports SD write timeouts. It also then extends the timeout to see if it then completes.
The DEBUG menu also shows the total number of writes carried out.
Please try a screenshot again.

I'm still looking at the audio problem.

Mike

"SDtest7" DEBUG

"SDtest6"

Radio and model changes cannot be forced to be recorded
No sound
Screenshot 0 kB

No sound at all. (SDtest5)
Selecting the "screenshot" switch may damage the SD card. Again, changes cannot be saved. It cannot be opened after connecting to a PC.

MikeB wrote: ↑Mon Jun 06, 2022 10:37 am That tells me an actual write to the SD card is failing. I'll need to add some more debug in the lower level code to find out why!
Does SDtest4 voice now work?

Mike

No sound at all.

I guess I ran into something (bug).
Changes are saved unless I set (use) the switch on "Screenshot". Then it goes wrong and nothing is saved and model names change, etc.

I have SDtest3

I renamed Model01 and changed the background color.
Then I selected position 02 (Model02) and took the display. (it's whole, it doesn't go down anymore)
Off and on and the changes are gone.

Again, SDtest2 no longer saves radio and model settings
Overrides the model name when changing the model.