openrcforums

Hello,

I would like to make switch F a 3 Position switch. I have already soldered a 3 Position switch into the radio (which works as a 2 position switch), but it won't let me do the software settings other than a 2 position switch. Is there a way to change this?

Br, spcboarder

Thank you for the answer. The problem was somewhere else - I would have never found it allone. I have the e-flite A-10 Warthog with the Spektrum AR636 receiver withAS3X and SAFE. As I wanted to test the servos before completing the plane, I laid the plane on the back for binding. However, the receiv...

After Flashing the Firmware to Version Jumper T 18 2.3.12 I got the Modes DSM X11ms, but it did not work with binding.

After Flashing the internal Module Firmware I lost DSM X11ms again.

Seriously, I do not know what to do.

Br, spcboarder

Unfortunately the Firmware for a Jumper TX18 does not work. There I get a "WrongPCBdetected Error". I downloaded Firmware: Jumper T18-6-12-2.3.8V0027.bin However, I just updated the Jumper software to 2.3.12 and now my Radio seems to work and I even get the DSM X11ms Protocol, which (I hop...

Thanks suncoaster!

I selected the Jumper T18 and I could bring back my safed models
BR, spcboarder

PS: so far this radio is giving me some headaches. I hope I will solve thes issues. I hope you guys from the forum can help me out on my further challenges as well!

Hello, I try to bind my Radioking with Spektrum receiver in an e-flite A-10 Warthog (https://www.horizonhobby.de/en_DE/product/a-10-thunderbolt-ii-64mm-edf-bnf-basic-with-as3x-and-safe-select-1150mm/EFL01150.html ) A friend of mine was binding his Radioking with an e-flite model without any problems...

Hello, I have a Radioking TX18S. I have problems with updating the firmware/copying safed models back to the radio. In all the Firmware updates Radioking is not mentioned as supported Radio. It looks like a Radiomaster TX16s, but has one button less (page back). In another thread here (https://www.o...