openrcforums

Hi Jim

This is helpful. Thank you.

The github thread offers a documentation of the HoTT sensors, which helps. But I still have to devise a migration method for my models so that I don't have to change all switches and functions.

Jochen

Hi I've installed Version 2.3.15 on my Taranis X-Lite Pro and my TX16S. It seems that the mapping and naming of telemetry sensors has changed. For example battery voltage before was sensor 'RxBt' with sensor-ID '0004', after the update the same value is on sensor'Rbtm' and the sensor-ID '0005'. Id d...

Update: I did the version change on Radiomaster TX16S to 2.3.14 and the module to 1.3.3.0. After the update the value for Alt+ on the TX16S is working properly too.

Thank you for supporting me on the topic, Kilrah!

You are right. I didn't deliver the versions. What I will do is to update my radios from 2.3.11 to 2.3.14 and the multis as well. Then I will test the result and get back. This might take 1 or 2 weeks... Anyway, thank you this far.

So Alt+ is max(Alt) - not 'calculated'. Ok. But the reading from Alt is perfect. I get normal readings like 109m. But the Alt+ value then displays something like 2312m on the TX16S (see picture: https://www.dropbox.com/s/zo3escuv88nqcsy/Alt%2B_example.png?dl=0) and109m on the Taranis. Are you sure t...

Hi Kilrah. Thanks for the fast reply. I didn't receive the notification so I didn't see it... I also thought at first that there might be wrong values being sent. But this seems implausible, since the Graupner Vario sends the Alt and VSpd values. I can display these on either TX perfectly. The probl...

Hi I would like to see the maximum altitude next to the current altitude on my telemetry screen. In the telemetry settings I have Alt and VSpd values. In the telemetry screen I can show Alt-, Alt and Alt+. I guess Alt+ is for the maximum altitude. So I display the Alt+ value on the screen and apply ...

Hi Mike Thank you. This really helped. I've been trying for max alt since some weeks now. Problem solved :D But I got another issue with this: The widget 'value' seems to have a bug. When I set color to black, the display shows the value in dark gray instead of black. This is the Telemetry screen: h...

Hi. I tried the method to record and display the max altitude and it works - exept the scaling. I get meters in the Alt sensor value. But the channel value is 0.2% when the max altitude should be 2 meters. So I probably need the scalers MikeB mentioned. But I don't know how to implement a scaler. Co...

Correct. You can do that on the mixer directly without logical switch. Sorry. I did that out of habit. You often use a physical switch to control different mixes and so on. That means you configure the same switch with the same 'meaning' in different locations. I always define a logical switch that ...

Hi I've moved the post, since I think I got the wrong section before... Sorry. Hope I'm in the right spot now. I've programmed my Radiomaster TX16S for a while now and it works just great. I normally use Graupner HOTT receivers. Now I'm setting up a Horizon Night Timber BNF with Spektrum AR637TA (BN...

Hi I would approach it like this: 1. assign a logical switch to the physical switch you would like to use for on/off switching 2. create a mixer on the channel connected to the smoke engine, use throttle as source AND set switch to the logical switch from step 1 This way throttle gives the input, bu...

I moved this post, since I think I put it in the wrong place.
Can anyone tell me how to delete this post? Thx

New place: https://openrcforums.com/forum/viewtopi ... 45&t=13155

@Carbo: Thanks for your reply. I did follow the idea and it works better.

Hi I've built a complex template for gliders, that supports all setups from 0 to 4 rudder wings with standard Rud/Elev over V-Tail or even Delta wings. I can configure the basic setup with mixers and trim most important mixes in flight. But I'm running into a problem with crow brake that I don't kno...