openrcforums

Sorry for all my messages.

Finally it is bind.

My config is so :

Turnigy 9xr pro + ersky9x-r222 firmware
Module frsky XJT with "XJT_EU170317" firmware

receiver frsky xm plus

Everything in LBT mode.

Thank you for guiding me !

Ok i updated to the ersky9x-r222 and i was finally able to flash my xjt module and it beep again ! I flash my xjt with this firmware "XJT_EU170317" My receiver is a frsky xm plus and i bought it in LBT version. I gonna try to flash my xjt module in a non LBT version to see if they do a mis...

https://lh3.googleusercontent.com/Ya-9hgv-NCG98tLQPxOSIq5XuZSMKEQ58kiCGsaSysEm1T49ItlDqlPijFQjeZFmd6ygAKmydjRP4oVS_HErPWmgUFQMZFu5cFFL9zu447FjKmMcGF6ayM3Fs10Jw8iu1VTwvsDHD2hTDOycZ5sApL3JfuLwWbdcYvwpIL7Piu1lGUVB1vFpgQkBkiMX_9HFHIxmsqPbKsr2R9oDeRrdlh4201ppdZkModNv73h6B6pshrTScij0NP2WQDipHBrrDRx3DEsaT...

Hi, On my XJT led are on but it doesn't beep anymore when i turn on the radio. [EDIT] : on my djt, red led is on but it is not intense I'm not sure of which pin is what so, beginning by the top : Pin 1 to 2 : 0V Pin 1 to 3 : 8V Pin 1 to 4 : 3V Pin 1 to 5 : +- 3V Pin 3 to 5 : 11.3V Pin 3 to 4 : 11.5V

Hi Mike,

I've got the ersky9x-r212 V4-Mike.
I tried to flash with open tx but it doesn't help.

Simon

Hi, I tried to flash my xjt module. I turned on the radio in boot mode then began flashing xjt firmware. Unfortunately it didn't work (flashing progression stops during flash) and besides i had a short and had to remove the R9 resistor as i saw in another topic. Now i cannot enter in bind mode anymo...