openrcforums

Okay. I'm still reading the documentation to ensure I understand the flashing processes. I should be able to migrate the radio to erskyTx before the end of the month. I will post questions in an X12/X12S thread or add my experiences/questions to an existing one.

Rick

Mike,

I am pleased to learn of your progress with the X20. I just purchased a new/unused X12S from a private individual for the sole purpose of installing erskyTx. Is there anything I can do to assist you with the X12S work? This X12S features v.1.2.23 software and X12SNEU14 hardware.

Rick

This thread has been open for ~ 3.5 years. I notice Mike asked about FCC & EU certification early in the discussion. Jumper's website shows an FCC ID sticker on their module but this could be strictly marketing information and not rigorously correct. Does anyone know of a multi-protocol module, ...

I think not worth the effort. I lack facebook and may other accounts of this type. I have never had that much time to socialize...

Thanks,

Rick

Mike,

I noticed your post on RCG regarding this topic. I have tried but largely been ignored. My efforts have been through the IRC US dealer network and IRC directly. All I can do is continue to try. I have requested a specification as well.

Rick

Mike,

I will begin discussions with ImmersionRC about this because this is the system I prefer so I'll do the leg work. Is there anything specific you need me to discuss with them?

Rick

I am posting to ask about the current level of support for the TBS and ImmersionRC long range RF systems in ErSkyTx. These are the Crossfire and Tracer from TBS and the Ghost from ImmersionRC. It appears the answer to my question is yes because I see Mike responded to a member searching for XFIRE (C...

With all the attention given the aftermarket boards (that is, http://ar9x.net) regarding open source firmware I am somewhat surprised that no one has attempted to use a main board from a current, or discontinued, radio as a starting point to convert a Tx. Am I missing something here? Both the ARUni ...

I am also interested in the status of ordering these boards. A blank board is fine for me.