openrcforums

With FULL the output is -weight with the switch off and +weight with the switch on. With HALF the output is 0% with the switch off and +weight with the switch on. Mike Hi Mike, I'm pleased to report that it works perfectly! I am now going to experiment with using all the other switches to do what t...

If you add a mixer line to channel 2 like: CH2: +35% HALF switch(GEA) then when you activate the gear switch, CH2 will have 35% added to it. If the stick is in the centre, then CH2 will go to 35%. Is that what you need? Mike Brilliant Mike, this looks like the answer I was after. Will try later tod...

Still searching for an answer on this one, anyone?

Hi guys, Well, I finally flashed and updated my Turnigy 9x and couldn't be happier. I have also finally worked out how to get the Tamiya MFU-03 to work with the controller in its entirety. Now the important bit, I want to be able to control the lights like headlights with a switch. To be specific, I...

Maybe show the error you get when you try to do so. Are you providing power to the radio? It typically won't get enough through the programmer, a battery should be installed and power on. I've tried both, it's the same result, nothing! As for error messages, sadly I don't get ANY messages as when i...

Thanks for the response! But still there are clearly issues as I can not read the firmware from the TX or upload new software. Any thoughts on the other issues?

Hi guys, well it feels like I've spent about two weeks trying to learn how to update my Turnigy 9x V2 (ATMEGA128) transmitter to OpenTX and I just can not do it. :oops: This is the video that I followed: Turnigy 9x Firmware upgrade the easy way I started with purchasing a USBtiny44 from eBay wired i...