openrcforums

Hello

I'm interested!
I don´t have an HOTT Esc but have an MGM wich output HOTT telemetry...
Would like to test!

Waiting for feedback.

Best Regards

Kilrah wrote: ↑Tue Oct 11, 2022 7:23 am It's just that the FSD only supports what's on that list and that doesn't include cell voltage, GPS etc...

Hello Kilrah

If you open pic 1, you will see that it shows also individual voltage cells (VLFS), the total of the cells and GPS too!

Hello Everyone, i hope that someone can help me overhere..... I'm proud to say that i already built 5 Openx Sensor! :) It's an outstanding working piece. Let's go to the issue... I fly helicopters, planes , gliders and rc boats, and have one in each one. I never got used to use a stick radio in the ...

Yes it would.

Been there, done that!
At the moment I'm using a BN220 just because is a little bit smaller [emoji6]..
But if you are having long time connection issues, the problem might not be the GPS, but the configuration....

Enviado do meu Mi 9T Pro através do Tapatalk

Hello Everyone, First, this is by all means the best "Open and Not Open Sensor" available :) ! All the things it can do, it's really outstanding......5 stars to the creator and all the ones who helped creating this little brain!!! :) I have already made 3 of them, one used in a Rc Heli, ot...

Hello, You don´t know me, and someone reading this might get it wrong...Every time i post something to help someone, like i was helped in this area from 20 years ago, i try to be precise in order to not induce someone in mistake..."Been there..Done That.." ;) I only know , something now( a...

i will give you mine humble opinion, In the future use the VCC, 5V , or 3.3V for Vref instead of Internal ref. You will gain resolution in the measured value, and don´t need voltage dividers. The ACS712 only accept 5v of supply, not even 3.3v. Assuming you are using the bidirectional version at 0 am...

OK, from what i understand you are using the internal voltage reference. I never did that in any of mine projects, because the IC is powered always above the internal voltage reference, in the case of the atmega 328. You don´t need 6 values..the 6 values are for voltage reading,not current reading! ...

Hello ronron84, The voltage levels accepted by the atmega328 from the arduino depends on is operating voltage, 3,3V or 5V. So the ADC can´t get higher voltage then the supply voltage. If you are powering the current sensor from the 3,3 or 5,0 volt you won´t get problems. In that case you put : #defi...

Hello ronron84,

I would like too, but i think it´s not implemented.
The best person to help you his mstrens.

Best Regards

Hello, There are two ways to change the sensitivity of the vario (MS5611). Either with #define PPM_VIA_SPORT or #define PIN_PPM This also works and VSpeed is found as a sensor in both cases If you now also use AIRSPEED_COMPENSATED, then in PPM_VIA_SPORT mode no more VSpeed found, when using PIN_PPM...

I’ve just received a GY-521 module (no BARO or Magnetometer) & once the calibrations were set up, this appears to be fine at the Tx once small offsets (0.2g) were added in the FrSky telemetry screen. Display resolution reduced to 1 decimal place for ease of readability. AccZ reads 1g, whilst X ...

Hello, just to show some pics of mine openx Sensor for FRSky...if somebody needs help or have any doubt, feel free to ask! Best Regards https://uploads.tapatalk-cdn.com/20200217/64b4991a3860dac8fddde4808086fde8.jpg https://uploads.tapatalk-cdn.com/20200217/b4ed3617bbebff8027c7277e39a0539c.jpg https:...

Dear mstrens, Thank you for your great support and many thanks for your persistence with my inability! This test was successful, I was able to read out the sensor and also recalibrate it. So the ACC is in Life! Now I also changed also some settins in the script, I changed the INT to Pin3 = #define ...

I´m sorry,

I thought that you didn't solder the INT pin of the GY 86 board....yes, you can connect to Pin 3 of the Pro mini..If you declare it of course in the config. file..
Please check if that pin isn't assigned to any other thing...

You need to solder the INT(interrupt) to Digital PIN 2 of the Arduino Pro Mini clone, if you don´t do it, it will not work!!!!

Please try it....

Are you using a pro Mini?..Are you sure that is 5V 16MHZ, and not the 3.3V 8Mhz?

Hello Eaglefly,


Do you have correct accelerations outputs in X,Y AND Z, because I'm having good output in Z but not in X and Y...
Do you use opentx?

Best Regards

Enviado do meu Mi 9T Pro através do Tapatalk

Yes PeterB, considering what you said i believe it´s a faulty part.

Hello Peter B, Mine have incorrect values at ACC_x and ACC_y, but it´s not stuck like yours. Even though, when i test the board with another ino. sketch for testing the MPU6050, with the offsets provided by oxs.sketch with uncommented "#define DISPLAY_ACC_OFFSET // used ONLY in order to display...

Hello Everyone,

Is someone getting good values, concerning acelleration of the GY-86 board with Openx Sensor?

I´m having good data in the Z acelleration using open TX, but the acelleration in X and Y is incorrect!

Can anyone give some feedback?

Best Regards to all.

some more points about your tests with the "master" release: - did you check that there where no other line in the config that asked for filling Test1 ,2 and 3 with other values than accelerations? - if you rotate your sensor, does the accX and Y change in a logical way? Hello mstrens, I ...

Hello mstrens,

It is exactly like you said in the previous post.

Please check photo

What Ami doing wrong?

Enviado do meu Mi 9T Pro através do Tapatalk

Hello mstrens, I have done everything exactly like it's in description. Board levelled...seeing X and y from above...I checked the level with a bubble level in X and y axis....both offset in X, y and z are the same provided by the other sketch.. -3200 in accx 880 in accy 238 in accz (board is rotat...

Hello, First of allcongartulations to mstrens for this fantastic project. I´m no programming Guru but have some experience with arduino, unfortunately i´m getting crazy with the GY-86 offset values i´m having.. I read the description and made everything likeit described... I uncommented the #define ...