Search found 1426 matches
- Mon Jan 09, 2017 9:25 pm
- Forum: Hardware Mods
- Topic: Continued-Infrared module for JR compatible TX, including 9x
- Replies: 128
- Views: 113014
Re: Continued-Infrared module for JR compatible TX, including 9x
Glad you got it working for you
- Sun Jan 08, 2017 11:16 pm
- Forum: Hardware Mods
- Topic: Continued-Infrared module for JR compatible TX, including 9x
- Replies: 128
- Views: 113014
Re: Continued-Infrared module for JR compatible TX, including 9x
I think the 30 second duration is when the arduino timer overflows and resets. Cant remember which timer as the sketch uses 2 of them. at least my foggy memory remembers something along that line. It does sound like your throttle is off as your led is not blinking during the 30 seconds.. yea home au...
- Sun Jan 08, 2017 10:32 pm
- Forum: Hardware Mods
- Topic: Continued-Infrared module for JR compatible TX, including 9x
- Replies: 128
- Views: 113014
Re: Continued-Infrared module for JR compatible TX, including 9x
yea but it does get me out of my chair and off of my fat @ssKilrah wrote:That sounds both a lot less fun but a lot more "useful"rperkins wrote: This winter it is making a laundry room in the basement. ha ha
- Sun Jan 08, 2017 10:01 pm
- Forum: Hardware Mods
- Topic: Continued-Infrared module for JR compatible TX, including 9x
- Replies: 128
- Views: 113014
Re: Continued-Infrared module for JR compatible TX, including 9x
There is an issue though. When throttle is at 0 and the radio is left switched on, the IR module still sends something out every 30 seconds. When this happens, the helicopter starts its motor briefly. I had that problem at one time and adjusted the code to try to compensate. I'd be curious if the s...
- Sun Jan 08, 2017 7:33 pm
- Forum: Hardware Mods
- Topic: Continued-Infrared module for JR compatible TX, including 9x
- Replies: 128
- Views: 113014
Re: Continued-Infrared module for JR compatible TX, including 9x
Glad you are narrowing it down. ER9x is the firmware that I used with a 9X and the IR module.
originally I only outputted 4 channels, as that is all I need. Maybe you could experiment with only outputting 4 channels and setting radio up as such.
the code for the module would need to be edited .
originally I only outputted 4 channels, as that is all I need. Maybe you could experiment with only outputting 4 channels and setting radio up as such.
the code for the module would need to be edited .
- Sun Jan 08, 2017 12:21 pm
- Forum: Hardware Mods
- Topic: Continued-Infrared module for JR compatible TX, including 9x
- Replies: 128
- Views: 113014
Re: Continued-Infrared module for JR compatible TX, including 9x
its been a long time but glancing at the code it looks like you are using the correct in and out pins. remember if you try version 8 or earlier the output pin is different and you will need to download the library mentioned in the readme. the only advice I can give is to hookup the LED_OUTPUT_PIN . ...
- Sun Jan 08, 2017 10:34 am
- Forum: Hardware Mods
- Topic: Continued-Infrared module for JR compatible TX, including 9x
- Replies: 128
- Views: 113014
Re: Continued-Infrared module for JR compatible TX, including 9x
Greeting from Spring Hill Tennessee Here they all are. I havent messed with this since my last post. I've moved several times this last year and pretty sure I threw out all my S107. Still got my MCPX though :) I'm now living in Tennessee and there is an RC park a few miles away. Just need to work le...
- Wed Sep 14, 2016 10:18 pm
- Forum: PROGRAMMERS
- Topic: Getting rid of the Hobby King usbasp SCK error
- Replies: 72
- Views: 102983
Re: Getting rid of the Hobby King usbasp SCK error
This line is what is important in your post.
avrdude: Device signature = 0x1e950f
if you do a search on that signature i think you are reading your arduino.
avrdude: Device signature = 0x1e950f
if you do a search on that signature i think you are reading your arduino.
- Wed Sep 14, 2016 6:21 pm
- Forum: PROGRAMMERS
- Topic: Getting rid of the Hobby King usbasp SCK error
- Replies: 72
- Views: 102983
Re: Getting rid of the Hobby King usbasp SCK error
Its been a while but i would try jp3. If that doesnt work copy and paste the exact error code because most usbasp used a m8 mcu but a few used something different (m88?). The firmware you load has to match the mcu on your usbasp
- Fri Mar 18, 2016 11:47 pm
- Forum: PROGRAMMERS
- Topic: Updating Usbasp firmware using Eepe in Windows
- Replies: 119
- Views: 119118
Re: Updating Usbasp firmware using Eepe in Windows
If your usbasp is working. dont worry about updating it . problem solved
- Thu Mar 17, 2016 9:30 pm
- Forum: PROGRAMMERS
- Topic: Updating Usbasp firmware using Eepe in Windows
- Replies: 119
- Views: 119118
Re: Updating Usbasp firmware using Eepe in Windows
no you dont use that hk cable. that is for burning ESC. Use the cable that came with it. IT probably isnt J2 you need to short. You probably need to add a solder bridge to the unpopulated spot next to J2. You will also need a second usbasp to program the first one. You could always look at the schem...
- Sat Feb 20, 2016 1:56 am
- Forum: er9x
- Topic: Emailing me directly
- Replies: 22
- Views: 37706
Re: Emailing me directly
I thought it was the resurrection of erazz
- Sat Feb 20, 2016 1:28 am
- Forum: FrSky Taranis radio
- Topic: Linux Taranis x9d plus dont work
- Replies: 12
- Views: 11039
Re: Linux Taranis x9d plus dont work
Whenever I see these types of error upon inserting a usb device, it is always hardware related. 1. usb device failed. 2. cable bad. 3. usb port defective. the computer has not completely enumerated the device. It is not an issue of the software you are going to use to communicate with the device. er...
- Sat Feb 20, 2016 1:14 am
- Forum: PROGRAMMERS
- Topic: Updating Usbasp firmware using Eepe in Windows
- Replies: 119
- Views: 119118
Re: Updating Usbasp firmware using Eepe in Windows
yes. but you will have to remove the solder before the device will work as a usbasp. When the jumper is bridged the MCU is not running its normal program
- Sat Feb 20, 2016 1:03 am
- Forum: PROGRAMMERS
- Topic: Updating Usbasp firmware using Eepe in Windows
- Replies: 119
- Views: 119118
Re: Updating Usbasp firmware using Eepe in Windows
yes. I have updated those exact usbasp with different firmware. I had a pair of pointed tweezers I would stick into those thru holes to put the unit into programming mode but a jumper of solder or wire would work also.
- Tue Jan 19, 2016 4:45 am
- Forum: Where to buy / Spares / Modules? Selling up?
- Topic: 9xr and 9x programmers offered at 9xrprogrammer.com
- Replies: 43
- Views: 45148
Re: 9xr and 9x programmers offered at 9xrprogrammer.com
Yea, I'll be around. Dont think I took my heli out once this year. Maybe next year.
- Tue Jan 19, 2016 1:58 am
- Forum: Where to buy / Spares / Modules? Selling up?
- Topic: 9xr and 9x programmers offered at 9xrprogrammer.com
- Replies: 43
- Views: 45148
Re: 9xr and 9x programmers offered at 9xrprogrammer.com
Hello. The 9xrprogrammer.com website has been retired. You can still retrieve driver and other information from the sister site http://usbasp.us . I think that will be up for another month or so. If anyone has any issues I can be reached here or at randyperkins@randyperkins.com . I have a few spare ...
- Wed Dec 23, 2015 3:42 am
- Forum: Where to buy / Spares / Modules? Selling up?
- Topic: 9xr and 9x programmers offered at 9xrprogrammer.com
- Replies: 43
- Views: 45148
Re: 9xr and 9x programmers offered at 9xrprogrammer.com
sorry for the caps lock as I copied and pasted this from the website. Merry Christmas everyone HELLO I AM ON VACATION TILL JAN 4TH. SHIPPING WILL RESUME THEN. YOU CAN STILL ORDER BUT IT WONT SHIP TILL JAN 4TH. SORRY FOR ANY PROBLEMS. THANKS. I ONLY HAVE 10 PROGRAMMERS LEFT TO SELL SO I HAVE MARKED T...
- Sat Dec 05, 2015 2:13 pm
- Forum: er9x
- Topic: er9x V2 = mbtx
- Replies: 153
- Views: 92714
Re: er9x V2 = mbtx
Hi
What is the license of this new firmware.
Thanks
What is the license of this new firmware.
Thanks
- Thu Nov 26, 2015 1:43 pm
- Forum: PROGRAMMERS
- Topic: No power during flashing and "Verification failed"
- Replies: 21
- Views: 21751
Re: No power during flashing and "Verification failed"
I just updated through homebrew to the latest HEAD version and it worked perfectly. --snip-- 2.) I still get the error message that THR, ID2 and AIL are on, no matter what their state is. Is that normal?! I assumed that's due to the Telemetry mod! Great. I'll leave the hardware issue to the experts...
- Thu Nov 26, 2015 1:23 pm
- Forum: PROGRAMMERS
- Topic: No power during flashing and "Verification failed"
- Replies: 21
- Views: 21751
Re: No power during flashing and "Verification failed"
avrdude -v avrdude: Version 6.1, compiled on Oct 15 2015 at 01:54:34 Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/ Copyright (c) 2007-2014 Joerg Wunsch It appears you have hardware issues as well ( burned up a trace myself at one time ), but this could very well be the cause of your m...
- Thu Nov 26, 2015 1:13 pm
- Forum: PROGRAMMERS
- Topic: No power during flashing and "Verification failed"
- Replies: 21
- Views: 21751
Re: No power during flashing and "Verification failed"
please post the version of avrdude using 'avrdude -v' from the command line
- Thu Nov 26, 2015 1:11 pm
- Forum: PROGRAMMERS
- Topic: Programming 9x with USBASP fails, works with Arduino
- Replies: 15
- Views: 18320
Re: Programming 9x with USBASP fails, works with Arduino
[ I checked it, MOSI, SCK, RST and MISO have the 100 Ohm resistor in from. Just for your reference and for the next guy reading this thread. a RP1 with a value of 101 (100 ohms) is fine. It is only when RP1 has a higher value like 221(220 ohms ) or 471 ( 470 ohms ) that problems programming the 9x/...
- Wed Nov 18, 2015 1:10 am
- Forum: General Information & Rules
- Topic: Forum Upgrade
- Replies: 98
- Views: 71035
Re: Forum Upgrade
Does look like there is an option to turn 'notifications' off granularly if you dont want them
- Wed Nov 18, 2015 1:08 am
- Forum: General Information & Rules
- Topic: Forum Upgrade
- Replies: 98
- Views: 71035
Re: Forum Upgrade
mine shows the same thing, but the notifications says 'notifications(0)' There is an option of the bottom that says 'select all'. Then at the top it says 'mark read' . I think mine are all already 'read' so the option to mark them is greyed out. I imagine if the main page says notifications(1) , the...
- Tue Nov 17, 2015 2:41 am
- Forum: Software
- Topic: Problem using avrdude 6.0.x to program 9x/9xr
- Replies: 10
- Views: 15968
Re: Problem using avrdude 6.0.x to program 9x/9xr
avrdude 6.2 has been released. This is the first release within the 6.x series of avrdude that does not have this bug. versions 5.11.x is good for 9x/x9r programming also. http://lists.nongnu.org/archive/html/avrdude-dev/2015-11/msg00015.html Thanks to Joerg Wunsch for chasing down this bug, fixing ...
- Mon Nov 16, 2015 6:23 am
- Forum: General Information & Rules
- Topic: Forum Upgrade
- Replies: 98
- Views: 71035
Re: Forum Upgrade
well that is a plus I hope
- Mon Nov 16, 2015 6:18 am
- Forum: General Information & Rules
- Topic: Forum Upgrade
- Replies: 98
- Views: 71035
Re: Forum Upgrade
was the account created before the upgrade ??
- Sun Nov 15, 2015 7:38 pm
- Forum: General Information & Rules
- Topic: Forum Upgrade
- Replies: 98
- Views: 71035
Re: Forum Upgrade
thanks.bob195558 wrote:Hi rperkins,
"Members" list is at the bottom of page:
^ Board index: "Members"
Bob B.
- Sun Nov 15, 2015 6:21 pm
- Forum: Software
- Topic: gruvin9x board no buzzer in opentx
- Replies: 24
- Views: 16225
Re: gruvin9x board no buzzer in opentx
I think Gruvin gave the best advice here http://openrcforums.com/forum/viewtopic.php?p=105317#p105088 This would require opening the radio and moving some wires, I think. I dont believe there is a FW version for opentx that supports what you want. It may help if you fully explain what modification h...