openrcforums

Dear Chris, I have try your configuration, but it don't work. It is the same situation. I can't see the MPU6050 data. Maybe as idee, gives in the code of the openXsensor an other part, there not can work with all version of the MPU6050 ? This was the question, then: 1. With the line by the INV_MPU.C...

Dear all, good evening, Now, to day I have spend more time in this problem. 1. I have put in as 1. Baro GY86 ->>>>>> Baro works, no problem. 2. Then I put in that the MPU6050 is connected ->>>>>> Baro not works, no telemetrie data to the TX 3. Then I change in "INV_MPU.C" File the part to ...

Dear all, Maybe I have also this problem. When I have in the configuration the GY86 as first baro and the MPU is off, then the Vario works, that means, the data go's to the TX. When is switch the MPU on, then I don't have any telemetrie values from the baro. On the Seriell Monitor I see that the var...

Good evening, Many, many thanks to everyone for your help and ideas. Well, FrOs, which I use, knows no sensor search and just take the fixed addresses. It is also not possible (at the moment) to use other sensor addresses. Then I took the MCU6050 out of the configuration, but the baro / vario sensor...

Dear all, Today I soldered an OpenX sensor together with a BMP280 sensor and a separate MCU6050 sensor. I first checked the addresses with an I2C scanner, the BMP280 has the address 0X76 and the MCU6050 has the Address 0X68. Then I loaded a test sketch for the BMP280 and the Sensor has issued a corr...