Search found 8 matches
- Sun May 14, 2023 2:03 am
- Forum: openTx model setup
- Topic: Latest Rx firmware for OTX, not Ethos
- Replies: 1
- Views: 4490
Latest Rx firmware for OTX, not Ethos
Hi. I have some SR6 Rx's and the FrSky website says V2.1.10 is for ethos only. V2.1.12 does not specify. I tried both 9 & 12 and they both work except V2.1.9 will calibrate via ch 12 toggling, V2.1.12 requires using the LUA script to turn calibrate on. Can anyone shine some light on this please?...
- Thu Sep 21, 2017 11:09 pm
- Forum: openTx for FrSky radios
- Topic: Model Artwork for Horus
- Replies: 6
- Views: 10254
Re: Model Artwork for Horus
Thanks Gentlemen! I've been looking everywhere till now.
- Sat Sep 17, 2016 7:27 pm
- Forum: Software
- Topic: 2.1.9 Firmware not seen by Tx USB
- Replies: 0
- Views: 4082
2.1.9 Firmware not seen by Tx USB
Hi
I just tried to upgrade from 2.1.8 to 2.1.9
The software overwrote the Companion no problem, but now when I plug in the Tx, nothing happens.
I re-installed Zadig 2.2, no difference. It see's the Tx in bootloader mode.
Any ideas?? Do you need to un-install Open TX first???
Thx
I just tried to upgrade from 2.1.8 to 2.1.9
The software overwrote the Companion no problem, but now when I plug in the Tx, nothing happens.
I re-installed Zadig 2.2, no difference. It see's the Tx in bootloader mode.
Any ideas?? Do you need to un-install Open TX first???
Thx
- Wed Aug 24, 2016 6:20 pm
- Forum: General help (FrSky Taranis radio)
- Topic: Binding with a JR DM9 External Module
- Replies: 8
- Views: 7405
Re: Binding with a JR DM9 External Module
Learn something every day... Thx
- Wed Aug 24, 2016 1:20 pm
- Forum: General help (FrSky Taranis radio)
- Topic: Binding with a JR DM9 External Module
- Replies: 8
- Views: 7405
Re: Binding with a JR DM9 External Module
Thanks gentlemen. Last comment is the Spectrum AR7010-X Rx DOES work fine with the JR Tx (DSM-2) and either module. So I expect the Rx is backwards compatible, just not using the Taranis X9E. ??? When I set the Taranis to DSM mode the Spectrum-X Rx lights did flash then go solid but no servo movemen...
- Wed Aug 24, 2016 2:09 am
- Forum: General help (FrSky Taranis radio)
- Topic: Binding with a JR DM9 External Module
- Replies: 8
- Views: 7405
Re: Binding with a JR DM9 External Module
I just got my Orange receivers working!!! The Tx settings have to be; PPM CH 1-? 22.5ms 300-400u (-) NOT + Now the module lights work and blink. The Spectrum AR7010-X still no response! I wonder if it is because it is an "X" series??? I'm running 2.1.8 firmware. Any chance that could be it?
- Tue Aug 23, 2016 11:10 pm
- Forum: General help (FrSky Taranis radio)
- Topic: Binding with a JR DM9 External Module
- Replies: 8
- Views: 7405
Re: Binding with a JR DM9 External Module
Thanks BossHawg but no joy. The module when in the T X9E lights up steadily a couple seconds after powerup with button held in. The Rx just keeps blinking. My other module doesn't light up at all! Yet both work fine in my JR 9303. In the JR radio the older module (Separate antenna) blinks till I let...
- Tue Aug 23, 2016 6:49 pm
- Forum: General help (FrSky Taranis radio)
- Topic: Binding with a JR DM9 External Module
- Replies: 8
- Views: 7405
Binding with a JR DM9 External Module
Hi Fellas I am new to Taranis by about 2 months. Just now trying to use either of my JR 2.4Gh DM9 modules to bind with an AR7010-X Rx. Both modules work fine in the JR radio, 9303. When I power up the Taranis X9E while holding in the button, after a few seconds the module lights up solid, NOT blinki...