Search found 339 matches
- Tue Jun 18, 2019 10:00 am
- Forum: openTx
- Topic: FrSky FLVSS Individual Cell Voltages with 2 LiPo's
- Replies: 2
- Views: 2568
Re: FrSky FLVSS Individual Cell Voltages with 2 LiPo's
Will try and see how I get on.
- Tue Jun 18, 2019 8:36 am
- Forum: openTx
- Topic: FrSky FLVSS Individual Cell Voltages with 2 LiPo's
- Replies: 2
- Views: 2568
FrSky FLVSS Individual Cell Voltages with 2 LiPo's
Hi, I found and old post detailing how to display lowest cell value, so I can set a logical switch and alarm on lowest cell reaching a threshold, rather than pack voltage, which could mask a problem. I now have a plane using 8 cells, 2 x 4 cell LiPo's in series. I have two FLVSS sensors, and have ch...
- Sun May 26, 2019 1:05 pm
- Forum: Hardware
- Topic: SOLVED - Taranis plus - Problem with wave files
- Replies: 8
- Views: 5749
Re: Taranis plus - Problem with wave files and on/off switch
SOLVED - That has fixed it, don't know why, but works now.
- Sun May 26, 2019 11:25 am
- Forum: Hardware
- Topic: SOLVED - Taranis plus - Problem with wave files
- Replies: 8
- Views: 5749
Re: Taranis plus - Problem with wave files and on/off switch
Thanks. Trying one last format, using a port in my printer, instead of formatting inside the radio via USB.
- Sun May 26, 2019 10:19 am
- Forum: Hardware
- Topic: SOLVED - Taranis plus - Problem with wave files
- Replies: 8
- Views: 5749
Re: Taranis plus - Problem with wave files and on/off switch
I have already done a full format. Is 2GB ok or do I need 1GB ?
- Sun May 26, 2019 8:48 am
- Forum: Hardware
- Topic: SOLVED - Taranis plus - Problem with wave files
- Replies: 8
- Views: 5749
Re: Taranis plus - Problem with wave files and on/off switch
Update to my wave file problem. My original X9D bought in 2013 has the original 1GB SD card. It contains custom phrases like "Aileron Rates High" created in 2013. My new (second hand) X9D+ bought last month as a warranty return (binding issue, just had wrong firmware) has a 2GB SD card. Bo...
- Fri May 17, 2019 12:55 pm
- Forum: er9x / gruvin9x / th9 based firmwares
- Topic: How can I mix a percentage of down elevator when throttle is is increased?
- Replies: 4
- Views: 13686
Re: How can I mix a percentage of down elevator when throttle is is increased?
I use pot 2 on a spare channel e.g CH 10 to generate between 0% and e.g. 40% Then use special functions to set a Global Variable to value of CH 10 Then mix your elevator to throttle using the GV as the weight. Start the flight with pot 2 turned to 0% Then trim plane to glide under idle / no power. F...
- Mon May 13, 2019 8:22 am
- Forum: Hardware
- Topic: SOLVED - Taranis plus - Problem with wave files
- Replies: 8
- Views: 5749
Re: Taranis plus - Problem with wave files and on/off switch
QX7 work like that as on / off is push button but X9D+ is slide switch and just turns off with warning.
- Mon May 13, 2019 7:27 am
- Forum: Hardware
- Topic: SOLVED - Taranis plus - Problem with wave files
- Replies: 8
- Views: 5749
SOLVED - Taranis plus - Problem with wave files
Hi all, I just acquired a warranty return mint condition X9D+ for next to nothing because "It won't bind to a receiver" As I suspected, it had the wrong firmware in the internal module, so it binds perfectly. I flashed to the latest Open TX 2.2.3 version, formatted the SD card, and downloa...
- Tue May 07, 2019 2:56 pm
- Forum: Software
- Topic: S6R Firmware issue - need EU / UK version of firmware.
- Replies: 1
- Views: 2430
Re: S6R Firmware issue - need EU / UK version of firmware.
Ok, just answered my own question. Downloaded the zip, and when I look at it I find it contains both versions....
- Tue May 07, 2019 2:14 pm
- Forum: Software
- Topic: S6R Firmware issue - need EU / UK version of firmware.
- Replies: 1
- Views: 2430
S6R Firmware issue - need EU / UK version of firmware.
Hi, Am looking to purchase an S6R from Hobbyking for use in UK. They only have the US version, UK version out of stock. I figured no problem, just purchase and reflash to EU LBT version. But when I look on the Frsky website, there seems to be no option to choose which version of firmware to download...
- Fri May 03, 2019 11:21 am
- Forum: Hardware
- Topic: 2 QX7 questions
- Replies: 2
- Views: 2769
Re: 2 QX7 questions
I use beep centre on my Taranis, but for QX7, we want it to vibrate only, not beep. Beep centre does both.
Robert
Robert
- Fri May 03, 2019 8:38 am
- Forum: Hardware
- Topic: 2 QX7 questions
- Replies: 2
- Views: 2769
2 QX7 questions
I bought a QX7 a while ago to try out, liked it, but use my X9D for all my models. A friend has looked at both my radios, liked the QX7 and bought one. His model has a 3 pin port at the bottom right of the case that mine does not, what is this for? Secondly the default model had the throttle giving ...
- Fri Jun 09, 2017 2:01 pm
- Forum: General help (FrSky Taranis radio)
- Topic: How to play telemetry value at value intervals e.g. every 100 feet change in altitude
- Replies: 2
- Views: 3425
Re: How to play telemetry value at value intervals e.g. every 100 feet change in altitude
Looks like it will work, will let you know
- Fri Jun 09, 2017 10:40 am
- Forum: General help (FrSky Taranis radio)
- Topic: How to play telemetry value at value intervals e.g. every 100 feet change in altitude
- Replies: 2
- Views: 3425
How to play telemetry value at value intervals e.g. every 100 feet change in altitude
Is there an easy way to do this? When thermaling, I would like altitude spoken for every +/- 100 feet in altitude.
Regards
Robert
Regards
Robert
- Fri May 26, 2017 2:55 pm
- Forum: General help (FrSky Taranis radio)
- Topic: Model ID issue
- Replies: 5
- Views: 8355
Re: Model ID issue
Agreed, my point is it shouldn't have let me do that. When you copy a model, it should generate a new model ID
- Fri May 26, 2017 1:37 pm
- Forum: General help (FrSky Taranis radio)
- Topic: Model ID issue
- Replies: 5
- Views: 8355
Model ID issue
Hi, Discovered a potential issue with Taranis and X series receivers. If you create a new model, it allocates a new model ID, and if you try to change it you get a warning if you pick an ID already in use. BUT If you copy a model, and bind a new RX, you can quite happily bind to the same model ID of...
- Wed Apr 26, 2017 7:13 pm
- Forum: Hardware
- Topic: switch problem in FlySky with open TX
- Replies: 5
- Views: 4728
Re: switch problem in FlySky with open TX
My plan was to cut all the 8 pins with a Dremel and then remove the stubs one at a time....
- Wed Apr 26, 2017 2:25 pm
- Forum: Hardware
- Topic: switch problem in FlySky with open TX
- Replies: 5
- Views: 4728
Re: switch problem in FlySky with open TX
Hi,
Got the new switch, what's the best way to remove the old one. Not sure I can unsolder 8 pins simultaneously.
Robert
Got the new switch, what's the best way to remove the old one. Not sure I can unsolder 8 pins simultaneously.
Robert
- Mon Apr 10, 2017 10:45 am
- Forum: Hardware
- Topic: switch problem in FlySky with open TX
- Replies: 5
- Views: 4728
switch problem in FlySky with open TX
Hi, I had an original FlySky which I modded with sound and on screen Frsky telemetry. I passed this to a friend when I got my Taranis a couple of years ago. He went to use it for the first time this year (worked fine last year), seems the on/off switch has a problem. It needs to be turn on on and of...
- Tue Dec 13, 2016 8:50 pm
- Forum: General help (FrSky Taranis radio)
- Topic: Cross trims?
- Replies: 13
- Views: 9118
Re: Cross trims?
You can't use instant trim and cross trims at the same time. Instant trims affects the wrong functions. I have asked for this feature several times over the years, without success.
- Tue Dec 13, 2016 8:05 pm
- Forum: Hardware
- Topic: RF-MFX720-JR Module Series Multi-Protocol Spectrum System with Taranis
- Replies: 5
- Views: 5296
Re: RF-MFX720-JR Module Series Multi-Protocol Spectrum System with Taranis
https://www.amazon.co.uk/RF-MFX720-JR-M ... B00P2RFKLK
version 2.1.7 2016:01:05
I tried every single combination of protocols but none worked.
version 2.1.7 2016:01:05
I tried every single combination of protocols but none worked.
- Tue Dec 13, 2016 3:26 pm
- Forum: Hardware
- Topic: RF-MFX720-JR Module Series Multi-Protocol Spectrum System with Taranis
- Replies: 5
- Views: 5296
RF-MFX720-JR Module Series Multi-Protocol Spectrum System with Taranis
Hi, Got one of the above to try out. I can bind to a spektrum rx, the lights indicate bind successful, if I turn taranis off and on, the rx starts a single flash indicating loss of signal, so they are talking, but no matter what I select in the taranis, I can't make any servos respond. Does anyone h...
- Tue Mar 29, 2016 2:58 pm
- Forum: General help (FrSky Taranis radio)
- Topic: Mixer question
- Replies: 2
- Views: 2531
Re: Mixer question
Many thanks for that.
- Tue Mar 29, 2016 11:44 am
- Forum: General help (FrSky Taranis radio)
- Topic: Mixer question
- Replies: 2
- Views: 2531
Mixer question
In the mixer screen, where I choose the source, if for e.g.I want the throttle stick as the source, I have two choices, with a different icon to the left of the text 'THR' One is like a capital i the other might be a picture of the stick. What is the difference, they both seem to be the same. Robert
- Tue Mar 29, 2016 11:40 am
- Forum: General help (FrSky Taranis radio)
- Topic: Remember switch / pot settings bug ?
- Replies: 5
- Views: 3959
Re: Remember switch / pot settings bug ?
I found it, needed a long press to get to it.
- Sun Mar 13, 2016 9:31 am
- Forum: General help (FrSky Taranis radio)
- Topic: Remember switch / pot settings bug ?
- Replies: 5
- Views: 3959
Re: Remember switch / pot settings bug ?
Hi, I have a follow up question now I have solved the above.
The Pot adjusts channel 9.
Then I have special function:
Adjust GV5 CH9
Seems I have to assign a switch to this, when what I actually want is this to be always on.
but ON doesn't seem to be an option.
Any clues?
Robert
The Pot adjusts channel 9.
Then I have special function:
Adjust GV5 CH9
Seems I have to assign a switch to this, when what I actually want is this to be always on.
but ON doesn't seem to be an option.
Any clues?
Robert
- Sun Mar 13, 2016 9:01 am
- Forum: General help (FrSky Taranis radio)
- Topic: Remember switch / pot settings bug ?
- Replies: 5
- Views: 3959
Re: Remember switch / pot settings bug ?
I had it to Manual. Setting it to Auto fixed it.
Many thanks
Many thanks
- Sun Mar 13, 2016 8:50 am
- Forum: General help (FrSky Taranis radio)
- Topic: Remember switch / pot settings bug ?
- Replies: 5
- Views: 3959
Remember switch / pot settings bug ?
I have always found the remember switch setting extremely useful. I now have a mix where I am using a pot to control the amount of throttle to elevator mix. I want this position remembered as it will likely be different on different models. When I switch to a model, I get the switch warning, and a s...
- Fri Mar 11, 2016 4:40 pm
- Forum: Template Library
- Topic: Full House E-Glider, Extra 3POS switch, Open9X, Phoenix 2K
- Replies: 29
- Views: 35728
Re: Full House E-Glider, Extra 3POS switch, Open9X, Phoenix 2K
I have my crow brake set up so bottom 49% of throttle stick is brake and top 49% is throttle. (deliberate small dead spot in the middle) I have a voice repeat "landing" every 10 seconds so I know I am in this mode. So if approach goes wrong, just power up and climb. No trying to switch mod...