openrcforums

No luck working on the pot. To confirm what I have setup. I have gone into the mixer menu and set channel 9 to switch. On the servo menu up position 988Us on centre position 1500 and on down position 2012. All looks good. I take it I don't have to set up the input page? I got success with one leg wo...

Thanks for the quick response, Yes I have D16 channels 1-16. I plugged a standard servo in channel 9 to check and it works fine. Will try assigning to a pot today and let you know how I get on.
Thanks again.

Sorry for delay, been away. I have set the receiver as D16 with channels 9-16 on the receiver. I have channel 9 assigned to a 3 way switch and when switching the switch there is a definite pulse but no movement on the retracts. It is a new retract controller and both linear servos have worked . I kn...

Looking to see if anyone can help. I have a Tarot 650 sport with Taranis plus radio and X8R receiver tx/rx I have set my reciever to 1-16 channels assigned chanel 9 to 3 position switch on radio but other than small pulse retracts do not function. The retract controller tl8x002 tells me P W M signal...