Search found 121 matches
- Sun Jan 09, 2022 8:16 am
- Forum: Sound Pack Library
- Topic: Recording custom sound files using Audacity
- Replies: 2
- Views: 5685
Re: Recording custom sound files using Audacity
A much easier program to use to generate your own sound files is TTSAutomate. It automatically saves the files in the correct format for OpenTX.
- Tue Sep 14, 2021 10:08 am
- Forum: openTx
- Topic: Looking for help with fixing/improving Trainer/Student behaviour.
- Replies: 6
- Views: 4156
Re: Looking for help with fixing/improving Trainer/Student behaviour.
Jthornton: take a look at https://www.rcgroups.com/forums/showpost.php?p=33036059&postcount=9 There are some fancier versions in the last couple pages of that thread that do things like automatically switch control to the instructor if the student signal is lost. OpenTX will give an audio warni...
- Wed Sep 08, 2021 5:14 pm
- Forum: FrSky Taranis radio
- Topic: Fi old discontinued frsy receivers work with new firmware
- Replies: 5
- Views: 3026
Re: Fi old discontinued frsy receivers work with new firmware
Flashing the receivers using OpenTX already exists using the transmitter. Couldn't be much easier.
- Thu Aug 26, 2021 7:02 pm
- Forum: openTx
- Topic: Looking for help with fixing/improving Trainer/Student behaviour.
- Replies: 6
- Views: 4156
Re: Looking for help with fixing/improving Trainer/Student behaviour.
I use this system for training, plus I also have a switch so that the student only has control of aileron and elevator as an alternative to full control. To give control, I use one of my two momentary switches. I find the momentary switches really useful with OpenTX for a variety of applications, an...
- Sat May 08, 2021 8:25 pm
- Forum: Hardware
- Topic: FrSky Taranis X9D plus buddy lead issues.
- Replies: 2
- Views: 3295
Re: FrSky Taranis X9D plus buddy lead issues.
You need a mono lead, stereo leads will cause exactly that problem.
- Tue Apr 27, 2021 2:53 pm
- Forum: Hardware
- Topic: High Power Transmitter
- Replies: 2
- Views: 2776
Re: High Power Transmitter
Certainly in Europe you are only allowed to fly as far as you can see, so what is the point.
- Tue Apr 27, 2021 2:52 pm
- Forum: openTx for FrSky radios
- Topic: Open TX companion not seeing my radio settings
- Replies: 2
- Views: 4401
Re: Open TX companion not seeing my radio settings
You need to have a copy of your SD card on your computer, and set up Companion to link to that file location.
- Sun Apr 18, 2021 4:07 pm
- Forum: General help (FrSky Taranis radio)
- Topic: Tranais X90
- Replies: 3
- Views: 2943
Re: Tranais X90
I sold all my Specktum receivers for more than the cost of new FrSky ones, though as Kilrah says you can use the multimodule with them. If you have the FrSky ones you can have the benefit of the FrSky telemetry system.
- Mon Apr 05, 2021 7:57 pm
- Forum: openTx
- Topic: Switchless trainer mode?
- Replies: 5
- Views: 4650
Re: Switchless trainer mode?
Yes it can be done, I use it and it works well. I use the version provided by Lapinfou further down the topic. Checked it with the latest version of OpenTX, 2.3.11
See here: https://www.rcgroups.com/forums/showthr ... k-Takeback
See here: https://www.rcgroups.com/forums/showthr ... k-Takeback
- Mon Jun 22, 2020 6:52 pm
- Forum: Hardware
- Topic: Replace RS with momentary switch Taranis X9D?
- Replies: 3
- Views: 3739
Re: Replace RS with momentary switch Taranis X9D?
I replaced one of the three position switches with a second momentary switch. Quite easy, a bit of soldering, and reconfigure OpenTX to recognise the new momentary. Would this help?
- Thu Jun 11, 2020 10:22 am
- Forum: Hardware
- Topic: S8R won't go into self check
- Replies: 6
- Views: 5281
Re: S8R won't go into self check
Sounds like you have not set up the self check switch correctly, either way it looks a bit complicated, you don't need a curve. It shouldn't go into auto level mode, it does a distinct up/down movement on the surfaces a couple of times. Full instructions on setting the SxR can be found here in the &...
- Tue Jun 09, 2020 8:01 pm
- Forum: openTx
- Topic: Documentation for OpenTX 2.2 Taranis and Horus
- Replies: 89
- Views: 229461
Re: Documentation for OpenTX 2.2 Taranis and Horus
Ooops! So it does. Thank you.
- Sun May 03, 2020 5:07 pm
- Forum: General help (FrSky Taranis radio)
- Topic: S8R binds and while the motor work servos don't
- Replies: 4
- Views: 3877
Re: S8R binds and while the motor work servos don't
Check out the "How To Part 2" of this documentation. It explains in detail how to set up the S6R/S8R:
https://openrcforums.com/forum/viewtopi ... =45&t=8724
https://openrcforums.com/forum/viewtopi ... =45&t=8724
- Thu Jan 16, 2020 10:28 pm
- Forum: openTx model setup
- Topic: X10s startup splash screen
- Replies: 8
- Views: 11229
Re: X10s startup splash screen
Did you update the SD card also?
- Fri Dec 20, 2019 4:13 pm
- Forum: openTx
- Topic: Updating firmware on Horus X10
- Replies: 2
- Views: 3182
Re: Updating firmware on Horus X10
Once again Geoff you are incorrect. You've already made your points on another forum to which I have responded that it is clearly there in the documentation posted in this forum that you do not need the Companion to update. Check page 33 of the Horus section where it tells you how to update without ...
- Sun Sep 29, 2019 3:33 pm
- Forum: openTx for FrSky radios
- Topic: Need Help With Time Alerts on Taranis Q X7
- Replies: 3
- Views: 4379
Re: Need Help With Time Alerts on Taranis Q X7
Why not use the momentary switch to call out the time when it is pressed? That way you can find out how long you have been up without an annoying callout every 5 minutes. I use this switch to give a range of telemetry readings at once, including the time elapsed.
- Wed Jul 17, 2019 5:02 pm
- Forum: openTx for FrSky radios
- Topic: Model Artwork for Taranis
- Replies: 519
- Views: 1097589
Re: Model Artwork for Taranis
Sometimes, as far as I know, the same word can be used for singular and plural.. I think it is the case. 1 Taranis 10 Taranis.. This'is how I see it. :) But I am not a native English speaker and might be confused with the other 2 languages I speak :) ;) Sent from my BLN-L21 using Tapatalk My feelin...
- Tue Jul 16, 2019 7:06 pm
- Forum: openTx
- Topic: OpenTX X10S to Tarranis QX7
- Replies: 8
- Views: 6201
Re: OpenTX X10S to Tarranis QX7
I would also add:
Do check that the function of each facet of your model setup works as expected on your model before flying. Occasionally not everything is converted exactly.
Do check that the function of each facet of your model setup works as expected on your model before flying. Occasionally not everything is converted exactly.
- Sun Jun 23, 2019 3:44 pm
- Forum: openTx for FrSky radios
- Topic: [HELP] Setting up mAh used with FCS-150A and OpenTX 2.1.3
- Replies: 6
- Views: 7336
- Mon Jun 17, 2019 7:53 pm
- Forum: openTx
- Topic: "Smart" Throttle Cut?
- Replies: 47
- Views: 31795
Re: "Smart" Throttle Cut?
Have you tried the link above? That smart throttle cut certainly works on a Horus X10 with OpenTX 2.2.3. Been using it for several years now.
- Thu May 23, 2019 2:00 pm
- Forum: openTx model setup
- Topic: Throttle cut using logical switch. (abandoned).
- Replies: 34
- Views: 27577
Re: Throttle cut using logical switch. (abandoned).
Martin, If you have this logical switch working as you say, how much problem would it be for you to post a (EEPE?) file for downloading as a template? I (and other readers) could then import the file into a test model set up and see if I/ they can get it work. Jim While you have read through the Ge...
- Wed May 22, 2019 12:23 pm
- Forum: openTx model setup
- Topic: Throttle cut using logical switch. (abandoned).
- Replies: 34
- Views: 27577
Re: Throttle cut using logical switch. (abandoned).
Basically this routine has no direct effect on the servo whatsoever. All it does is sets the throttle channel to -100 no matter where the throttle stick is. Then once switch E is held down for between 3 and 5 seconds AND the throttle stick is fully down it will enable the throttle stick to work aga...
- Tue May 21, 2019 7:13 pm
- Forum: openTx model setup
- Topic: Throttle cut using logical switch. (abandoned).
- Replies: 34
- Views: 27577
Re: Throttle cut using logical switch. (abandoned).
Basically the OP wanted a throttle cut without using extra receiver channels, and wanted to do this using logical switches. My suggestion was to have engine idle set at about -80 and use a software throttle cut which would set the throttle at -100 and thus stop the engine.
- Tue May 21, 2019 1:29 pm
- Forum: openTx model setup
- Topic: Throttle cut using logical switch. (abandoned).
- Replies: 34
- Views: 27577
Re: Throttle cut using logical switch. (abandoned).
Basically this routine has no direct effect on the servo whatsoever. All it does is sets the throttle channel to -100 no matter where the throttle stick is. Then once switch E is held down for between 3 and 5 seconds AND the throttle stick is fully down it will enable the throttle stick to work agai...
- Mon May 20, 2019 8:22 pm
- Forum: openTx model setup
- Topic: Throttle cut using logical switch. (abandoned).
- Replies: 34
- Views: 27577
Re: Throttle cut using logical switch. (abandoned).
Jim I have used this for several years on all my small models and it works fine, last used on Saturday. Just programmed it into Companion and again it works perfectly. Took my 5 minutes to enter it again. The operating system you use with a PC will make no difference. On one of the updates, OpenTX c...
- Sat May 18, 2019 2:07 pm
- Forum: openTx model setup
- Topic: Throttle cut using logical switch. (abandoned).
- Replies: 34
- Views: 27577
Re: Throttle cut using logical switch.
Hi Jim Look at L02. You have put !L03 each time instead of L03. The ! in front means, L03 is not true. You might need to check everything, as sometimes ! is used and sometimes not. Its a bit annoying, OpenTX lists all the ! options before the normal options. You need to scroll down the list further.
- Sat May 18, 2019 12:08 pm
- Forum: openTx model setup
- Topic: Throttle cut using logical switch. (abandoned).
- Replies: 34
- Views: 27577
Re: Throttle cut using logical switch.
Hi Jim Almost sure the error is in a little bit you highlighted. ...... shows a "+=" in the place where yours shows ":=".... This is the multiplex feature on the mixer. The "+=" means add the line to the previous one. The ":= " means replace. Replace.JPG On th...
- Fri May 17, 2019 1:10 pm
- Forum: openTx model setup
- Topic: Throttle cut using logical switch. (abandoned).
- Replies: 34
- Views: 27577
Re: Throttle cut using logical switch.
Jim Have a look at my documentation on this forum. https://openrcforums.com/forum/viewtopic.php?f=45&t=8724 If you go to the How To part 1 section there is a throttle cut there. Not sure what you mean by no channels left, I presume you mean receiver channels, as there are loads of transmitter ch...
- Sat Apr 13, 2019 10:34 am
- Forum: openTx
- Topic: Setting Trim values
- Replies: 18
- Views: 9701
Re: Setting Trim values
Because I don't want the motor to stop when idling as when you are 3Ding the worst thing that can happen is the motor to stop and then the ESC takes a couple of seconds to start the motor back up again. You don't get that linear throttle response. Have you checked the settings on the ESC? Often you...
- Wed Apr 10, 2019 1:57 pm
- Forum: openTx
- Topic: confusion and question on otx2.2.3
- Replies: 5
- Views: 3891
Re: confusion and question on otx2.2.3
There's full documentation in this section of the forum, just above your post.
OpenTX Documentation
Section 7 covers updating the firmware on the Taranis, and section 6 covers telemetry.
OpenTX Documentation
Section 7 covers updating the firmware on the Taranis, and section 6 covers telemetry.