openrcforums

Hello, I've backed-up my configuration to an eepe file and upgrade the radio, Turnigy 9x, to v2.1.5. After restoring and re reading the EEPROM I get this message: img1.jpg when I "save as", load to radio and re read I still get this message. when I select "Logical Switches" tab i...

Please re-read my question and answer it... there are several published telemetry mods, and some do not connect the line that allows the radio to send alarms levels to the module. If that's what you did, then the alarms on the telemetry page won't work and you have to use a logical switch and speci...

Please re-read my question and answer it... there are several published telemetry mods, and some do not connect the line that allows the radio to send alarms levels to the module. If that's what you did, then the alarms on the telemetry page won't work and you have to use a logical switch and speci...

With your setup the alarms would come out of the DJT's internal beeper. Did you do a version of the telemetry mod that has both serial lines connected to the DJT? Yes, I did the telemetry mod. I do get the voltage reading in the Tx LCD and the bars are updated. The only issue is that neither the Tx...

Kilrah wrote:

ramdg wrote: Am I missing something is my settings?

How should we guess if you don't post them?

Kilrah, please find attached the 9x configuration file that can be loaded into the OpenTX Companion 2.1.3.
The model is Quad 330 #5.

Thanks.

Hello, I’ve just completed modifying my Turnigy 9x for telemetry using FrSky DJT transmitter module and DFR-II receiver. I also connected an external battery monitor to the analog side connector and flashed the radio with the latest v2.1.3 FW with the telemetry support. So far most of my tests passe...