Confirmed, links work now.
Merry Christmas!!!
Search found 750 matches
- Sat Dec 24, 2022 7:28 pm
- Forum: erskyTx (was ersky9x)
- Topic: X-Lite Pro
- Replies: 34
- Views: 20575
- Sat Dec 24, 2022 5:10 pm
- Forum: erskyTx (was ersky9x)
- Topic: X-Lite Pro
- Replies: 34
- Views: 20575
Re: X-Lite Pro
Thanks a lot!!!
- Fri Dec 23, 2022 6:35 pm
- Forum: erskyTx (was ersky9x)
- Topic: X-Lite Pro
- Replies: 34
- Views: 20575
Re: X-Lite Pro
Ahhhh! So probably one can't mix PWM and analog gimbals on one radio (i.e. left stick analog, and right stick PWM)... And that must be the reason for the trouble I see...
- Fri Dec 23, 2022 6:10 pm
- Forum: erskyTx (was ersky9x)
- Topic: X-Lite Pro
- Replies: 34
- Views: 20575
Re: X-Lite Pro
Hi Mike,MikeB wrote: ↑Fri Dec 23, 2022 3:59 pm On http://www.er9x.com/ there is a version of erskyTx for the X-LiteS (rev 223).
That link leads to a 'file not found' (and also for the regular X-Lite).
- Fri Dec 23, 2022 3:56 pm
- Forum: erskyTx (was ersky9x)
- Topic: X-Lite Pro
- Replies: 34
- Views: 20575
Re: X-Lite Pro
Oh, my bad! Surely it's there! Thanks a lot! :) BTW, do you know whether X-Lite Pro supports both 5V and 3.3V Hall effect sensors on gimbals? The radio on my desk has one gimbal with 3.3v sensors, and the other gimbal with 5v sensors. The one with 3.3v works fine, and the other one jumps between 0 a...
- Fri Dec 23, 2022 2:02 pm
- Forum: erskyTx (was ersky9x)
- Topic: X-Lite Pro
- Replies: 34
- Views: 20575
Re: X-Lite Pro
Hi, Is there a way to get an Xlite-S version of the ErSkyTx ? At least a beta... :) All links seem to be gone... I'm investigating a misbehaving stick on the radio and I'd like to see raw ADC values. I think OpenTX doesn't show these, and there was such an option in ErSkyTx (if I remember correctly)...
- Sun Sep 05, 2021 5:17 pm
- Forum: Software
- Topic: Radiomaster TX16S - need help updating OpenTX
- Replies: 1
- Views: 4381
Re: Radiomaster TX16S - need help updating OpenTX
Answering to my own question. There's an article at Radiomaster's web site that explains my situation exactly: https://radiomasterrc.freshdesk.com/support/solutions/articles/64000267226 According to the article, the issue arises because the MCU is read-protected. How it got to this state remains a m...
- Thu Sep 02, 2021 9:46 pm
- Forum: Software
- Topic: Radiomaster TX16S - need help updating OpenTX
- Replies: 1
- Views: 4381
Radiomaster TX16S - need help updating OpenTX
Something went wrong while trying to update OpenTX from 2.3.11 to 2.3.14 on a TX16S. Now the radio does not power on - neither normally, nor in bootloader. When connected to a PC, the radio is detected as an 'STM32 BOOTLOADER', so there hopefully is a way to recover without a need for hardware inter...
- Wed May 19, 2021 12:32 pm
- Forum: General help (FrSky Taranis radio)
- Topic: Q X7 does not power on
- Replies: 3
- Views: 3556
Re: Q X7 does not power on
That sounds good!
There's a chance a new voltage regulator can fix it...
Thanks!
There's a chance a new voltage regulator can fix it...
Thanks!
- Wed May 19, 2021 10:19 am
- Forum: General help (FrSky Taranis radio)
- Topic: Q X7 does not power on
- Replies: 3
- Views: 3556
Re: Q X7 does not power on
Update: I don't see 3.3v output on the voltage regulator. When on battery and 'Power' button is pressed, the input of TPS54228 gets ~8V (battery voltage), but the output is still 0v. When connected via USB, the power output line gets ~4.5v all the time (but the input is 0v, so this clearly does not ...
- Tue May 18, 2021 5:42 pm
- Forum: General help (FrSky Taranis radio)
- Topic: Q X7 does not power on
- Replies: 3
- Views: 3556
Q X7 does not power on
Hi All, I got my hands on a Q X7 someone previously tried to repair. The radio did not power on and showed no signs of life whatsoever (also when connected via USB). I spotted a missing diode in the USB power circuit. I put the diode back and the radio is now detected as an 'STM32 Bootloader' in Dev...
- Wed Jun 05, 2019 11:04 pm
- Forum: Hardware
- Topic: Taranis X9DP - SD Card issue
- Replies: 20
- Views: 14845
Re: Taranis X9DP - SD Card issue
I think I found it... I took off the SD card socket and there was a lot of flux leftovers underneath... Some pins of the socket literally vanished when I touched them with a soldering iron. I guess the previous repair was done using some stronger acid instead of a soft flux, and the board wasn't pro...
- Wed Jun 05, 2019 9:04 pm
- Forum: Hardware
- Topic: Taranis X9DP - SD Card issue
- Replies: 20
- Views: 14845
Re: Taranis X9DP - SD Card issue
Yeah, that's how I figured it out... Playing some more with a built-in decoder in the protocol analyzer (I use PulseView)... As soon as I tell the analyzer that MOSI (Pin54) is SD-card's "Command" line, the software starts to complain ("Decoder reported an error"). Perhaps, the r...
- Wed Jun 05, 2019 8:06 pm
- Forum: Hardware
- Topic: Taranis X9DP - SD Card issue
- Replies: 20
- Views: 14845
Re: Taranis X9DP - SD Card issue
This is what my logic analyzer tells me when I select 'Update Int. XJT' from the Maintenance menu:
- Wed Jun 05, 2019 7:28 pm
- Forum: Hardware
- Topic: Taranis X9DP - SD Card issue
- Replies: 20
- Views: 14845
Re: Taranis X9DP - SD Card issue
Mike, I just hooked up a logic analyzer and I see some activity on pins 51, 52 and 53. Pin 54 is always low, and pin 56 is always high. Can you please explain which pin does what for the SD-card? Pin 52 is probably the 'Clock'. Is Pin 53 the 'Command' ? EDIT: Based on your comment above, I think it ...
- Wed Jun 05, 2019 7:10 pm
- Forum: Hardware
- Topic: Taranis X9DP - SD Card issue
- Replies: 20
- Views: 14845
Re: Taranis X9DP - SD Card issue
Hmm, in maintenance mode it's not hanging. It says "No files 1 " whenever I reach a step where a file needs to be selected.
- Wed Jun 05, 2019 5:27 pm
- Forum: Hardware
- Topic: Taranis X9DP - SD Card issue
- Replies: 20
- Views: 14845
Re: Taranis X9DP - SD Card issue
Nope... with the 'working' card in, the radio stops responding as soon as I select any menu item ( Flash Firmware / Run App / Restore EEPROM ). It just freezes and I have to pull out the battery again. :( I can hook up a logic analyzer to see what is going on. Though, I'm not sure I will be able to ...
- Wed Jun 05, 2019 12:42 pm
- Forum: Hardware
- Topic: Taranis X9DP - SD Card issue
- Replies: 20
- Views: 14845
Re: Taranis X9DP - SD Card issue
Any other ideas on what else to check?
Or is it time to go shopping for another MCU ?!
(the one I installed was absolutely new...)
Or is it time to go shopping for another MCU ?!
(the one I installed was absolutely new...)
- Wed Jun 05, 2019 10:18 am
- Forum: Hardware
- Topic: Taranis X9DP - SD Card issue
- Replies: 20
- Views: 14845
Re: Taranis X9DP - SD Card issue
I don't think it's a card's fault. Well, at least not only the card. I just took a working SD card from my main radio (AR9x). With this card, the radio DOES start in Bootloader mode properly. But when connected to a PC, the drive appears and then immediately disappears in Windows Explorer a couple o...
- Wed Jun 05, 2019 9:55 am
- Forum: Hardware
- Topic: Taranis X9DP - SD Card issue
- Replies: 20
- Views: 14845
Re: Taranis X9DP - SD Card issue
Ahh, there is an issue! If I start the radio in Bootloader mode with the SD card plugged in, the radio only shows 'Boot Loader'. No other words, no menu - nothing. And the radio is stuck in this state until a battery is disconnected. If I start the radio in Bootloader mode without the SD card, it do...
- Wed Jun 05, 2019 9:48 am
- Forum: Hardware
- Topic: Taranis X9DP - SD Card issue
- Replies: 20
- Views: 14845
Re: Taranis X9DP - SD Card issue
Hmm... There's something strange... I started the radio in Bootloader mode. But in this mode the radio is not detected as a USB device at all. Moreover, there seem to be no reaction on any button, and I can't even switch the radio off. I have to unplug the battery to shut it down. If I plug a USB ca...
- Wed Jun 05, 2019 12:31 am
- Forum: Hardware
- Topic: Taranis X9DP - SD Card issue
- Replies: 20
- Views: 14845
Re: Taranis X9DP - SD Card issue
I flashed the erskytx (latest beta).
The SD card stat screen shows:
Does this help in any way?
The SD card stat screen shows:
Code: Select all
Present = YES
READY 0004 0001
0064
- Tue Jun 04, 2019 10:32 pm
- Forum: Hardware
- Topic: Taranis X9DP - SD Card issue
- Replies: 20
- Views: 14845
Re: Taranis X9DP - SD Card issue
Thanks, Mike!
These all seem correct on the radio I have...
These all seem correct on the radio I have...
- Tue Jun 04, 2019 8:48 pm
- Forum: Hardware
- Topic: Taranis X9DP - SD Card issue
- Replies: 20
- Views: 14845
Taranis X9DP - SD Card issue
Hi All, I got a second-hand Taranis with a dead MCU. I successfully replaced the MCU and the radio seem to work fine, except for the SD card. The radio doesn't see any files on the card... I rechecked the MCU soldering and also tried all the microSD cards I had at hand (8Gb and up) - no luck... Afte...
- Mon May 13, 2019 8:28 pm
- Forum: erskyTx (was ersky9x)
- Topic: ERSKYTx (was ersky9x) Questions
- Replies: 2347
- Views: 1353814
Re: ERSKYTx (was ersky9x) Questions
Perfect!
Thanks a lot!!!
Thanks a lot!!!
- Mon May 13, 2019 1:47 pm
- Forum: erskyTx (was ersky9x)
- Topic: ERSKYTx (was ersky9x) Questions
- Replies: 2347
- Views: 1353814
Re: ERSKY9x Questions
A few quick questions from a local community here:
How to switch tracks in ersky music player? Are playlists possible?
Is music player documented somewhere?
How to switch tracks in ersky music player? Are playlists possible?
Is music player documented somewhere?
- Sun May 12, 2019 3:12 pm
- Forum: erskyTx (was ersky9x)
- Topic: ERSKYTx (was ersky9x) Questions
- Replies: 2347
- Views: 1353814
Re: ERSKY9x Questions
Ok, I think this answers all the concerns.
Thanks, Mike!
Thanks, Mike!
- Sun May 12, 2019 12:33 pm
- Forum: erskyTx (was ersky9x)
- Topic: ERSKYTx (was ersky9x) Questions
- Replies: 2347
- Views: 1353814
Re: ERSKY9x Questions
No no, the magic is that it can be done in software!
At least that's what my engineers were saying about SAMD chips when we discussed some other (unrelated) project.
There are some limitations, of course. So I'm not sure whether the requested swap is possible at all...
At least that's what my engineers were saying about SAMD chips when we discussed some other (unrelated) project.
There are some limitations, of course. So I'm not sure whether the requested swap is possible at all...
- Sun May 12, 2019 10:15 am
- Forum: erskyTx (was ersky9x)
- Topic: ERSKYTx (was ersky9x) Questions
- Replies: 2347
- Views: 1353814
Re: ERSKY9x Questions
The solution Customize attempted to suggest is to have a setting (perhaps somewhere in the Hardware menu) that reassigns the MCU pins. His idea is to swap the Internal and External ports. This way, the Internal will get all the bells and whistles, while External will become limited to PWM (CPPM, DSM...
- Sun Nov 18, 2018 8:49 am
- Forum: Other Electronic Projects
- Topic: Anyone familiar with Arduino and SAM D (a bootloader question)?
- Replies: 0
- Views: 5341
Anyone familiar with Arduino and SAM D (a bootloader question)?
I was asked for help to compile a bootloader for an Arduino M0 (a SAM D21-based board). I followed the instruction https://learn.adafruit.com/compiling-m0-atsamd21-bootloader/compile and the compilation seem to run just fine (I didn't do any modifications - just the regular 'make' on a freshly downl...