openrcforums

Ok . I've tried flashing OpenTx into one transmitter , then write an old eeprom and it works now. Thank you everybody...

@kilrah : are the eeprom of Open9x compatible with OpenTx?
@bertrand36 : what does it means?
Thank you all and Sorry for my ignorance...

I have a transmitter with firmware Open9x-stock-sp22-it-r1678 with 7 model settings on it. I've flashed another radio either with fw OpenTx-stock-it-r2281 and with Open9x-stock-it-r2129 but it looks like models(eeprom) is not compatible. Is that true or i made something wrong??? Thank you. Gianluca,...

Well, it works perfectly on switches, but not on throttle stick..... I have to find another way( reverse throttle might work?)... Or no matter...
Thank you.

I find it useful because i use the transmitter for my DLG glider and the startin position is: ID1 (ID0 is for speed mode,ID2 for thermal),rudder switch ON ( for launch mode) and throttle up( down is for brakes). So starting in this configurati in is justore safe. I'll try later and tell you if it wo...

Good morning. What i ask is probably something not new, but i really don't know how to find it... When we turn the transmitter on, some alarms tell us that some switches are in a wrong position. Is it possible to change the position of switches and sticks ? For example, when throttle stick is up, RU...

after 3 attempts without succes... now it worked.... don't know why, but thank you anyway...
Gianluca Italy

good evening. i've just tried to load the last two versions of open9x , 1670 and 1678 , but with both versions,Companion9x says that the firmware can't be loaded because it's not possible to save the EEPROM...
anybody knows why??
thank you very much to everybody. Gianluca, Italy.

ok. i use Companion and i've downloaded the firmware with sp22 option... i didn't know the meaning... and i don't know the meaning of many other options...
anyway, thank you very much for the solution..
gianluca, ITALY:

Yes, i do have smartieparts, but i don't know what " sp22 compilation option" is ...

i can't use the backlight in the proper way.... it turns on after 5seconds of inactivity( the contrary way), it turns off when i move sticks( and this is my choice) , and i find no way to
turn it on with a switch like AIL or RUDD( like i had in er9x...
is there a solution?
thank you, Gianluca,ITALY

awesome!... probably the italian version of open9x noht doesn't exist( companion say connection over time...) but i will try again.
thank you Rob....

no, just using frsky module... that's why!...i've seen now the same problem in " similar topics"... Sorry,i'm a donkey...
now,...i have to look for the highest version with no frsky,no heli,no template.... number......????

the problem disappear if i reload er9x version 772....
anybody knows why?...
tyhanks again...

good evening everybody. passing from er9x to open9x, i realized that the throttle switch and the aileron switch are always on. this happens not only on the starting screen, but also during operating mode, that means that i can't switch off an aileron/rudder mix i've set on the throttle switch... the...

good! ... and i like Companion9x!... just have to find and load the last version firmware of ....er9x or open9x....???

open9x-stock-frsky-it.... is this the right one?

for iPhone neither....unfortunately! ))

what you say it's what i do with my gliders on slope... but looking on youtube,i've seen that all dlg gliders low down ailerons. i don't know why(i'll ask next week at myfirst dlg meeting) and
i'll check the two ways.
does the .eepe files works Rob? it's the first time i load one on this forum....

Hello everybody. Here’s the way I’ve set my radio to fly my Notos DLG. This is the way it works: 4 servos.MODE 1. Ch1 right AIL . Ch2 ELE . Ch4 RUD . Ch6 left AIL. The normal mode fligh is with 3position switch on ID1 On ID0 I lift up ailerons of a couple of millimeters and low down elevator for spe...

maybe not much...but enough to allow me playing... :-) i checked the path of avrdude , and it looked correct, i mean, in the same polder of eepe... anyway i took a look at companion, and all the program looks more complete...and it works!... i just have to find the last version of er9x,the one with ...

problem solved ! using Companion9x instead of EEpe..

thank you very much to ROB THOMSON

i wish i could share my eepe files of my models on this forum but... when i connect the transmitter to the pc and start reading memory, the window of AVRDUDE opens,( the one with "AVRDUDE-Read EEPROM From Tx" written on it),... but no kind of "work" inside it...totally white and ...

well.... probably this is not the right topic to talk about this. in this case please, redirect me to the right place... i wish i could share my eepe files but... when i connect the transmitter to the pc and start reading memory, the window of AVRDUDE opens, but no kind of "work" inside it...

First of all : the mix you suggested me works perfectly and in the way i needed. To be' honest, i'm not really sure about how it works and why(i've just copied what You've written,so i'm not sure if i'll be' able to solve the problem If i find a similar situation...) but i will study it... Do you th...

tried now with eepe and i've understood how it works... will try on my transmitter changin numbers of channel of course. v<ofs means Value minor than offset??? is there a list where is explained all the meaning of all those abbreviations( lvl<ofs , v1==v2,XOR,v1>=v2,and others...)? thank you so much...

good evening everybody.i'm writing from Italy and i would need somebody's help. this is the problem. i've programmed my NOTOS DLG in this way : two ailerons on channel 1 and 6. elevator on 2 and rudder on 4. ID1 is normal flight, ID0 lift up ailerons of 2 millimeters and ID2 low down ailerons of 3mi...

ok. after i've followed the lessons on youtube i begin to manage something, and yes, it works both ways ( negative value or invert).
thanks a million again. i like this "freedom" of doin everything ,...i like ER9X ! ....

ahhhhh... got it.. i told u what i am... thanks a million...

question : could it be useful an italian translation of the er9x guide?

I know. i'm a real DONKEY...!!! but i can't find it... where is the reverse servo function on the er9x firmware? (svn: er9x - r768)
ok u can tease me....thank to anyone...
gianluca,Italy