openrcforums

It works, I just tested by locking my chip. Simply doing nothing more than installing a new firmware on it fixed it.
-Gohst

What happens if you leave it set to US in c9x, after you put it back in the TX? Maybe the labels are switched on one side.
-Gohst

Sent from my LG-P999 using Tapatalk 2

But doesn't the taranis already have a built in module that would be compatible with all if your receivers? Why would you want to use this external module?
-Gohst

Sent from my LG-P999 using Tapatalk 2

A suggestion, I the string needs to be a specific length. You should add a comment for that line with it's length. Assuming that you aren't already doing that, of course.
-Gohst

Sent from my LG-P999 using Tapatalk 2

Use Eepe, it will find the new version for you. Or you can go here.
-Gohst

New version works just fine with helicopters too.
-Gohst

Depending on what version you came from some things were added/changed in the eeprom layout. Go through and double check all of your settings before flying, just to make sure nothing else is changed.
-Gohst

It is posted in the Taranis forum, I would assume he is using a Taranis.

Maybe put your mixes on a virtual channel (one not used by the receiver) Then on channel 5 use the virtual channel as the source with the slow included there. The virtual channel will switch instantly from one point to another, but the real channel will slowly move from one point to the next.
-Gohst

eepskye loaded the eeprom from my radio just fine.
-Gohst

Prior to r800 I was getting jumps in the T1 value. Normal values were 250-300 F, it would jump to 412 or so. R800 seems to have fixed that.
-Gohst

Sent from my LG-P999 using Tapatalk 2

I see directions on the wiki for updating the firmware with SAM-BA. How do you down/up load the eeprom through SAM-BA?
-Gohst

What version firmware are you running for the Tx?

Check that your limits aren't set, I have mine at +/- 100 so I get -100 or 100 output on the channel I put the mixes on. Here is the file from mine.
-Gohst

No need for custom switches at all.
These 2 mixer lines should do what you need when the AIL switch is on there will be no active mixes on the channel, so it will default to 0. Try it in Eepe.
-Gohst

Double check all of your wires are still connected. Then re download the firmware. Remember you have to right-click and save-as, or something to that effect. Then reflash the firmware to the Tez.
-Gohst

Yes, voice switches get substituted in from the bottom up.
-Gohst

r86 is the new stable version. If you are already running r75, and have no problems, then this is not a mandatory update. Of course if you are still using the stock firmware that came on the Tez. Then, of course upgrade to r86. If you run sensor hubs with a lot of sensors, this update would be sugge...

I have a hand vacuum pump from a brake bleeding kit.
-Gohst

Sent from my LG-P999 using Tapatalk 2

Have you tried the pispkr mode? I think I saw other sound options available with that. Of course I can't remember exactly without looking at my TX right now.
-Gohst

Sent from my LG-P999 using Tapatalk 2

Cool sounds good, I think r86 is all working. I will probably make it the stable version, unless someone finds a problem with it.
-Gohst

Sent from my LG-P999 using Tapatalk 2

Interesting, it should work as well as r75. I have had no trouble with the switches. You grabbed the file from above in this thread? (r86) double check your wiring, and try reloading r86.
-Gohst

Sent from my LG-P999 using Tapatalk 2

That's easy to fix, just crash a few, then you will have more room. Works that way in the hangar (err garage) too.

Sounds like -> uninstall sam-ba, make sure to remove the remaining directory and files in "program files", and then reinstall sam-ba, and copy the sky9x files back to the "tcl-lib" folder.
-Gohst

Make sure to disconnect the programmer when measuring the MOSI, MISO, and SCK inputs. Just to eliminate the programmer from the equation here. Of course this is if you haven't already done so.
-Gohst

a B2 stealth bomber looks like it uses a split aileron to also do a rudder effect. By applying the brake on only one side the aircraft turns.
-Gohst

Canards are just normal planes that fly backwards!

conventional wing being one which is constantly follow by something called the tail of an aircraft, which typically includes an elevator and rudder control.
-Gohst

Mike,
Did you get to test r86 yet?
-Gohst

Wouldn't flap eron be the same thing as elevator on a wing? If you have 4 moving surfaces I think you can do brakes, but that would be all on a wing.
-Gohst

Sent from my LG-P999 using Tapatalk 2