Search found 123 matches

by tedbmoss
Mon Dec 11, 2023 3:29 am
Forum: Software
Topic: frsky D*R-II plus bootloader issue
Replies: 2
Views: 6416

Re: frsky D*R-II plus bootloader issue

Now you can put Mike Blandford's software on that old trashed Rx and it will work again.
by tedbmoss
Fri Nov 20, 2020 9:53 pm
Forum: UPGRADE BOARDS
Topic: Upgrade boards still out there ? for 9x ??
Replies: 4
Views: 6132

Re: Upgrade boards still out there ? for 9x ??

I have a couple for sale if you PM me.
by tedbmoss
Fri Nov 20, 2020 5:47 am
Forum: 9Xtreme upgrade board
Topic: 9Xtreme being released to the public domain (opensource)
Replies: 145
Views: 114718

Re: 9Xtreme being released to the public domain (opensource)

I have one Turnigy 9x with original 9xtreme installed with latest software A6r223, looks brand new. I will sell for 150 dollars American. PM me.
by tedbmoss
Thu Nov 19, 2020 5:08 pm
Forum: th9x
Topic: 9x been modded
Replies: 13
Views: 38596

Re: 9x been modded

This is an early Smartie Parts mod to allow reprogramming with out to much soldering. The internal FrSky Tx module has been added or a standard module has been modified and at a guess a further mod has been made to add sound. there was some problems with telemetering which may have been corrected wi...
by tedbmoss
Fri Feb 15, 2019 7:37 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: Setting up openXsensor
Replies: 12
Views: 12168

Re: Setting up openXsensor

just a note: I got the frsky ESC to work , but the readings aren't right yet
by tedbmoss
Sun Feb 10, 2019 7:52 am
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: Setting up openXsensor
Replies: 12
Views: 12168

Re: Setting up openXsensor

Thanks, but I wanted to figure it out myself and I did. Thank you again for building this (and maintaining it). I used 39.2k and 6.8k for the VFAS (8cell) and 4.7 and 2.2k for A3 (Rx batt 7.3 volt) with a little offset on both.The voltage ref is 5v. I used a .00001 as a divider to avoid the divide b...
by tedbmoss
Sat Feb 09, 2019 6:40 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: Setting up openXsensor
Replies: 12
Views: 12168

Re: Setting up openXsensor

So I am confused by oxs config having the same parameters in 6- voltages and current settings as advanced has. I took out the config_basic but it did not change anything because it was not used, so I put it back in and commented out the extra voltages in the config file then set the parameters in th...
by tedbmoss
Wed Feb 06, 2019 7:05 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: Setting up openXsensor
Replies: 12
Views: 12168

Re: Setting up openXsensor

Thank you. :D So far, I have vspd id 1,temp2 id 5 and alt id1.now for the next thing.
by tedbmoss
Fri Feb 01, 2019 2:14 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: Setting up openXsensor
Replies: 12
Views: 12168

Re: Setting up openXsensor

Thanks very much for all your work on this project. I made one several years ago and am now trying to get a single battery voltage (8 cell) and a vario working. So far, no luck. Did you combine the advanced and basic config.h files? My reason for using this is the FrSky ESC telemetering does not wor...
by tedbmoss
Thu May 11, 2017 5:51 am
Forum: ersky9xr
Topic: 9XR PRO
Replies: 1
Views: 3724

Re: 9XR PRO

Try searching for crow brakes or crow mixing
by tedbmoss
Thu Apr 27, 2017 8:06 pm
Forum: Software
Topic: flysky i6x elevon mix
Replies: 1
Views: 3301

Re: flysky i6x elevon mix

take out the battery?
by tedbmoss
Mon Apr 10, 2017 5:11 am
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4539
Views: 1960995

Re: ERSKY9X Coding

MikeB wrote: Sat Apr 08, 2017 10:51 pm The 'Pro and AR9X boards have a full SD card interface, the 9Xtreme uses a SPI interface. For various reasons relating to this, the 9Xtreme doesn't read the CID, CSD and SCR values from the SD card.
Something for me to look into sometime.

Mike.
Thankyou, Mike
by tedbmoss
Sat Apr 08, 2017 10:04 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4539
Views: 1960995

Re: ERSKY9X Coding

This seems to be a good place to put this.
shows the difference between SD card status page 9 on 9Xtreme and 9xrpro- ar9x.
I don't know if you can or want to make them the same. Test versions 3702-Mike 31.03.2017 -pc7r221
by tedbmoss
Sun Apr 02, 2017 3:47 am
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4539
Views: 1960995

Re: ERSKY9X Coding

eepsky april 1 2017 test version seems to work ok. thanks again Mike.
by tedbmoss
Sun Apr 02, 2017 2:19 am
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4539
Views: 1960995

Re: ERSKY9X Coding

I ordered mine.

eepesky update april 1 works ok as far as I can tell.
by tedbmoss
Fri Mar 31, 2017 11:57 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4539
Views: 1960995

Re: ERSKY9X Coding

thanks ahead of time Mike!
by tedbmoss
Fri Mar 31, 2017 9:55 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4539
Views: 1960995

Re: ERSKY9X Coding

this is the only place I have found any reference to the number of models in 9xtreme. Please tell me where this is referenced if I missed something. My 9xtreme does not handle the number of models the same way that the ar9x and 9xrpro do. for example in eepesky I can't copy a model from one slot to ...
by tedbmoss
Mon Mar 27, 2017 6:42 am
Forum: erskyTx (was ersky9x)
Topic: ErskyTx Test Versions
Replies: 141
Views: 297247

Re: Ersky9x Test Versions

Mike, the ersky9xProvR221c5.zip file for the ar9x board seems to not work, the previous c4 seems to work ok. c5 seems to work ok for the pro and the 9extreme. The old bootloader 1.7 only loaded the "s" smaller file. The new 2.4 bootloader loads the full ersky9x file. Thanks Mike, its amazi...
by tedbmoss
Fri Jan 08, 2016 7:01 am
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4539
Views: 1960995

Re: ERSKY9X Coding

Just checked the RTC on the 'PRO, all seems to be working fine, as does the setting of the FrSky Internal Alarm. Did you flash ersky9x_rom instead of ersky9xr_rom to the 'PRO? This could explain your problems as the RTC is different, and a signal from the RTC is used to control hardware serial inve...
by tedbmoss
Thu Jan 07, 2016 1:49 am
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4539
Views: 1960995

Re: ERSKY9X Coding

:? I must be in a different universe, how do I get back to the right one? :?
Oh, the next zip file down. The provisional one :D Thank you Jhsa.
by tedbmoss
Thu Jan 07, 2016 1:18 am
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4539
Views: 1960995

Re: ERSKY9X Coding

I guess I have to get more specific. The code from this page-- http://openrcforums.com/forum/viewtopic.php?f=7&t=4676. Ersky9x test versions ersky9xProvR218j.zip 02-jan-2016 16:45 has two files for the 9xr-Pro Vers:v3489-Mike ersky9x-r218 and also x9dp-rom v.1 that do not work properly with the ...
by tedbmoss
Wed Jan 06, 2016 6:31 am
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4539
Views: 1960995

Re: ERSKY9X Coding

The RTC only on my 9xr-pro does not work. It works properly on my Ar9x and 9Xtreme. 12-31-2015 software date. :( It does work with v.793-mike 5-26-2015 date. :) The internal Frsky alarm stays on all the time when set to on on the alarm menu on the 9xr-pro with Rec. working and sending telemetering b...
by tedbmoss
Mon Jan 04, 2016 2:25 am
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4539
Views: 1960995

Re: ERSKY9X Coding

Barometric altimeters are variable, but can give usable Altitude above your starting point. (Just zero it before you fly). Currently, my Galt and baro are reading high on the Multiprotocol module. (Except it stopped working with the hub). The RSSI and A1 and A2 and Tssi are working I think. That Tss...
by tedbmoss
Thu Dec 31, 2015 3:23 am
Forum: Turnigy 9XR radio
Topic: 9XR Brownout? Resetting!
Replies: 6
Views: 10041

Re: 9XR Brownout? Resetting!

There is a mod to fix that analog ground ;) .
by tedbmoss
Thu Dec 31, 2015 2:30 am
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4539
Views: 1960995

Re: ERSKY9X Coding

Yes, I avoided using "follow" because I wanted to avoid any problem this might cause,(I used it once to check it) and don't have more than 8 channels anyway. I might have to use 16 channels to check operation though. :D
by tedbmoss
Sun Dec 27, 2015 3:02 am
Forum: erskyTx (was ersky9x)
Topic: ERSKYTx (was ersky9x) Questions
Replies: 2347
Views: 1337460

Re: ERSKY9x Questions

Can we use just a transistor to invert the signal? Thanks João That is what I did, just a transistor inverter with a 2.7k resistor connected from 5 Volts to the junction of the output telemetering pin 5 on the Tx. and the collector. The base goes through a 10 k resistor to the driving signal which ...
by tedbmoss
Sun Dec 27, 2015 2:09 am
Forum: 9Xtreme upgrade board
Topic: Not in a safe throttle position...
Replies: 28
Views: 14046

Re: Not in a safe throttle position...

other problems I have found. Dirty pot; shows up on diag ana screen numbers bouncing a lot more than normally compared to other pots. loose pot on shaft in gimbals; starts out ok but settings keep changing usually in one direction. Last one can't happen on our Tx. because the pots are locked in plac...
by tedbmoss
Fri Dec 25, 2015 6:19 am
Forum: FRSky Telemetry Mods
Topic: 9x telemetry mods with XJT module
Replies: 3
Views: 9493

Re: 9x telemetry mods with XJT module

See second post above.
by tedbmoss
Tue Dec 22, 2015 8:51 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4539
Views: 1960995

Re: ERSKY9X Coding

I don't think using a different output from module that is not plug and play like all the other modules will be widely accepted, I fear that only a few people will ever use this marvelous invention for this reason.
by tedbmoss
Tue Dec 22, 2015 8:34 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4539
Views: 1960995

Re: ERSKY9X Coding

Do you have the SBUS type protocol firmware on your MULTI module? That display shows the values I would expect on the top two lines. You use COM2 with no inverter (3.3V logic levels). Perhaps Willhac will confirm the exact firmware he has on his MULTI module. Mike. yes I did use sbus type firmware ...

Go to advanced search