openrcforums

MikeB wrote: ↑Sun Mar 31, 2024 7:58 pm Always 33mm, this is the tuned length bit.

Mike

Mike, you are a savor

Yes, that is the range problem! The antenna cables are (very thin) coax. What you need to do is strip the outer black cover and the outer copper screen to leave the inner conductor with the clear insulation over it. This is a tuned length so you need 33mm stripped. Mike Thanks for the reply Mike :D...

Hello team ! Long time no see ! :D I have a Fr-Sky D8R-II Plus receiver and somehow i managed to cut bot antenna cables, the tips of the cables to be exact. Some days ago i installed this receiver into a gas boat and i noticed that after 10-15 meters it had no signal so i wanna change antennas. The ...

Hello again :lol: I'm working on a hydraulic steering project for my monster truck. I have a problem tho, it's steering perfectly but it doesn't self center. So i was thinking to hook up a potentiometer to the steering rod on my axle and onto the receiver, let's say CH4. This as a position sensor, l...

UPDATE: I plugged the hall sensor directly on the frsky hub. I glued one magnet on a PC fan and i connected it to the PC so i could monitor and compare the results. Sadly i have only one magnet at the moment (waiting for the new order to arrive) luckily on the firmware i could set the RPM to 1 blade...

Hmm i see...well i have to experiment a bit...sadly i have no clue about coding :lol: :lol: jhsa, i was reading about that on the github. :lol: actually my last questions was aimed for this project :lol: I was thinning to use the existing Frsky hub :roll: So i had something like this in my mind: (ha...

Oooh this looks interesting.
I didn't understand if i can use my existing hub and just plug an arduino base hall sensor on it instead of the optical.

Hello again :D I have an monster truck with a nitro engine. I wanna have RPM data of the engine, FrSky's optical sensor doesn't really help. :cry: I remember in past i saw something about a hall effect sensor and magnet on the flywheel. :lol: Did anyone try it ? If yes do i need one magnet ? can i h...

It's all good now, i wired it again from 0
Now i must some free time to read the manual of the firmware and get used to it.
Thank you all for your replies <3

Oh the -B was for the flashing...i resolved that already :D I have some problems with the firmware tho. I try to understand what's the cause. The firmware worked for a while and then a weird glitch appeared...like some one was pressing the buttons. I thought that maybe there was a sort or something ...

I have the RF9X v2 module.

MikeB wrote: ↑Mon Jan 11, 2021 8:08 pmAdding the -B 10 won't hurt.

Mike

What's that ?

oh LOL mike i just updated my post
Some pins from the m64 didn't sit on the board correctly and that's why they didn't respond. xD

One question tho:
does this firmware support the stock module ? I would like to switch between them. (not use them at the same time)

Oh yeah i have planned that mod for the future as well :D Btw now i try to flash the m64 with eepe but i get this strange error https://i.ibb.co/9YqM5Rq/Screenshot-1.png EDIT: I flashed the er9x-keydiag.hex, then it formated the eeprom. After that i tried to flash the er9x-frsky.hex, this time it fl...

i was thinking to order a m2561 and go for the max size.

Oh too late i soldered back the m64. :lol: Ah yes actually i need some more info about the current state of the firmwares but i was thinking to make a new thread about it but we can discuss here as well. :D I didn't flash my tx for loooooooong time, actually i didn't work on any rc project for a cou...

Oh i see xD
Well i will solder the m64 back then

Yeah my bad i forgot to mention that i replaced the m64 with a m128. 😁 I did some test, i tried multiple times to flash openTx with companion 9x but it fails. Yes let's say it's during the flashing process, more specific exactly when the flashing process finish. Of course i get nothing on the screen...

Ooh cool thanks !

I changed the title and the question because first i have to resolve something else. How do i flash a M128 on a stock x9 board ? In companion's settings is as this: openTx for m128/ 9X board I downloaded the firmware and started the burn process. After a while i get an error : Cannot convert EEProm ...

Check your switch. Normally the common pin is in the middle and is connected either to the left or to the right pins. That means, battery has to be connected to the middle pins and the modules to the right / left pins of the switch. Reinhard Yes i know. :D It's like this as well on the schematic. ;...

no no i don't want to use them both at the same time. I wanna have them both plugged but only one will work each time. and be able to switch module via a switch. :mrgreen: EDIT: Here i made a very fast schematic of what i have on my mind. EDIT2: I just noticed that on the schematic i have the GND on...

Hello ! I hope all of you are fine. :D As the title say i own a Turnigy 9X, it's modded and i also have the DHT module installed. I wanna use the stock module from 9x along with DHT. My question is, can i use 2 modules at the same time ? Actually i mean to have both of them on the Tx but work one at...

That would be a good idea !


Sent from my iPhone using Tapatalk

oh i see cool !

Thank you ! i will post a question about this in the main thread then


Sent from my iPhone using Tapatalk

thnks for the replies!
And the firmwares support them without any problem right ?

ah i see thanks !

Guys is it possible to upgrade the atmel processor on a stock TH 9x board with a bigger atmel ? bigger memory i mean

Guys is it possible to get haptic feedback with this mod ?

i already got a programer and the companion to flash the transmitter
I'm looking for frsky's tools for mac...or similar...if there are...
as i know frsky don;t have mac versions and also there aren't any ported versions...