MCPx Flying setup
Posted: Sat Apr 14, 2012 4:24 am
This is the setup I am using to fly my MCPx.
I based my setup on the recommended setup from the MCPx manual.
Channel 1 is the throttle channel
Channel 2 is ailereon
Channel 3 is elevator
Channel 4 is rudder
Channel 6 is pitch
The MCPx is easy to overload with pitch. The 55% is what feels good to me. If I push the pitch to it's limit and then give a lot of cyclic the tail blows out. As always adjust the settings to suit your needs.
-Gohst
I based my setup on the recommended setup from the MCPx manual.
Channel 1 is the throttle channel
Channel 2 is ailereon
Channel 3 is elevator
Channel 4 is rudder
Channel 6 is pitch
The MCPx is easy to overload with pitch. The 55% is what feels good to me. If I push the pitch to it's limit and then give a lot of cyclic the tail blows out. As always adjust the settings to suit your needs.
-Gohst