Please help.

[treotan]

I just try to flash my new 9XR to OpenTX. It doesn't work! It prompts the message when I try to reflash it. I using Mac version version 2.0.5, Jun 27 2014. Does my 9XR still have a chance to re-born? or it has been a brick?

=================================================================================
Started AVRDUDE
/usr/local/bin/avrdude -c usbasp -p m128 -P usb -U flash:w:/var/folders/y1/b75q37n97qb9fc2fm8rj76sm0000gn/T/flash.bin:r
=================================================================================

avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.01s

avrdude: Device signature = 0x1e9702
avrdude: NOTE: FLASH memory has been specified, an erase cycle will be performed
To disable this feature, specify the -D option.
avrdude: erasing chip
avrdude: reading input file "/var/folders/y1/b75q37n97qb9fc2fm8rj76sm0000gn/T/flash.bin"
avrdude: writing flash (65982 bytes):

Writing | ################################################## | 100% 488.79s

avrdude: 65982 bytes of flash written
avrdude: verifying flash memory against /var/folders/y1/b75q37n97qb9fc2fm8rj76sm0000gn/T/flash.bin:
avrdude: load data flash data from input file /var/folders/y1/b75q37n97qb9fc2fm8rj76sm0000gn/T/flash.bin:
avrdude: input file /var/folders/y1/b75q37n97qb9fc2fm8rj76sm0000gn/T/flash.bin contains 65982 bytes
avrdude: reading on-chip flash data:

Reading | ################################################## | 100% 371.26s

avrdude: verifying ...
avrdude: verification error, first mismatch at byte 0x0000
0x0c != 0x04
avrdude: verification error; content mismatch

avrdude done. Thank you.


=================================================================================
AVRDUDE done - exit code 1
=================================================================================