openrcforums

Hello RC heroes,

Need some help. Has been googling but no answer found, hope someone can help me out.

Recently i bought the Horus x10s mode 2( throttle left side, non EU).
Issue:
When select mode 2, it does not work as it should : roll works from left throttle stick (in mode 2 it should be YAW), and YAW works from right pitch stick( in mode 2 that should be roll/aileron).
But when select Mode 4 everything works ok.
Everything else working ok. Throttle and pitch working as it should.

More: this issue happening in all three aurdupilot, betaflight & cleanflight where in Ardupilot i can fix the issue by mapping the channel.

At the beginning i though its a opentx BUG. I have googled it and found nothing about this mode BUG.

Any help would be highly appreciable.

Your issue is likely not mode but the wrong order used for the channels in the mixer.

Strange.
What order it should be ? AETR.
And Yes, i am using R9m on transmitter. ( If it makes any difference).
MOre,
My input, mixer and output order are: RUD, ELE,THR, AIL

Please mark this thread as resolved.

Cannt believe it such a easy fix. I just changed the order to AETR in input, mixer and output and its working as it should.

Thanks for your kind help "Kilrah"

Only the mixer needs changing. Inputs have no order.