Trouble connecting to controller
Trouble connecting to controller
I can't get eepe to read or write to the EEPROM on my turnigy 9x transmitter. I'm running eepe on linux (originally tried it on win7) and when I try to read or write I get the following error message:
=================================================================================
Started AVRDUDE
avrdude -c usbasp -p m64 -U eeprom:r:/asdf:a
=================================================================================
avrdude: Warning: cannot query manufacturer for device: error sending control message: Operation not permitted
avrdude: Warning: cannot query product for device: error sending control message: Operation not permitted
avrdude: error: could not find USB device with vid=0x16c0 pid=0x5dc vendor='www.fischl.de' product='USBasp'
avrdude done. Thank you.
=================================================================================
AVRDUDE done - exit code 1
=================================================================================
How do I get the AVR to communicate with the ATmega64 on my controller? Is it likely that a soldered connection is not working?
=================================================================================
Started AVRDUDE
avrdude -c usbasp -p m64 -U eeprom:r:/asdf:a
=================================================================================
avrdude: Warning: cannot query manufacturer for device: error sending control message: Operation not permitted
avrdude: Warning: cannot query product for device: error sending control message: Operation not permitted
avrdude: error: could not find USB device with vid=0x16c0 pid=0x5dc vendor='www.fischl.de' product='USBasp'
avrdude done. Thank you.
=================================================================================
AVRDUDE done - exit code 1
=================================================================================
How do I get the AVR to communicate with the ATmega64 on my controller? Is it likely that a soldered connection is not working?
Re: Trouble connecting to controller
I think the problem is that your computer can't find the UsbAsp programmer..
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Trouble connecting to controller
Well at first I was using windows 7 and jumped through a lot of hoops to get my usbasp to show up normally under the device manager, which I assume meant that the drivers were installed correctly. Yet I eventually moved over to my linux os because all the troubleshooting suggestions on this problem say that its a driver problem, and to my knowledge linux does not require drivers for usbasp. Although it still isn't working on linux so I turned here. I am not too familiar with all this so I was partially hoping there might be an obvious problem with what Im trying to do that someone could spot.
- silversurfer48
- Posts: 88
- Joined: Fri Feb 26, 2016 7:00 am
- Country: United States
- Location: Los Angelas Ca
- Contact:
Re: Trouble connecting to controller
I cant get eepe to work Im getting a screen with the can not find usb and also no programer can someone please help I rather use the eepe then the sky eepe seem like it has more options
- silversurfer48
- Posts: 88
- Joined: Fri Feb 26, 2016 7:00 am
- Country: United States
- Location: Los Angelas Ca
- Contact:
Re: Trouble connecting to controller
=================================================================================
Started AVRDUDE
C:/Program Files (x86)/eePe/avrdude.exe -c usbasp -p m64 -U eeprom:r:C:/Users/ONWER/AppData/Local/Temp/eebackup.hex:i
=================================================================================
avrdude.exe: error: could not find USB device "USBasp" with vid=0x16c0 pid=0x5dc
=================================================================================
AVRDUDE done - exit code 1
=================================================================================
this is what i get on the eepe screen on my laptop can anyone out there help me get my eepe to work for me
Started AVRDUDE
C:/Program Files (x86)/eePe/avrdude.exe -c usbasp -p m64 -U eeprom:r:C:/Users/ONWER/AppData/Local/Temp/eebackup.hex:i
=================================================================================
avrdude.exe: error: could not find USB device "USBasp" with vid=0x16c0 pid=0x5dc
=================================================================================
AVRDUDE done - exit code 1
=================================================================================
this is what i get on the eepe screen on my laptop can anyone out there help me get my eepe to work for me
-
- Posts: 1844
- Joined: Tue Dec 27, 2011 8:22 pm
- Country: -
- Location: Ottawa
Re: Trouble connecting to controller
If using Er9x, use Eepe.
EepSkye is for ErSky9x
EepSkye is for ErSky9x
Re: Trouble connecting to controller
You need to describe everything you have, how you've connected what you have, what you've done until now very clearly and all in the same place. Only then can we, and thus you move forward.
It's impossible to understand where you stand with the way you talk. The only thing we can say is that your programmer is not recognised by your PC, i.e. either not connected or with no proper driver installed.
It's impossible to understand where you stand with the way you talk. The only thing we can say is that your programmer is not recognised by your PC, i.e. either not connected or with no proper driver installed.
- silversurfer48
- Posts: 88
- Joined: Fri Feb 26, 2016 7:00 am
- Country: United States
- Location: Los Angelas Ca
- Contact:
Re: Trouble connecting to controller
its all clear. you answered the question er9x uses eepe and skyer9x uses skyeepe ,right? know can I use opentx if I upgrade my 9xtreme board with skyeepe
-
- Posts: 1844
- Joined: Tue Dec 27, 2011 8:22 pm
- Country: -
- Location: Ottawa
Trouble connecting to controller
If you have installed a 9Xtreme board, then you are already using ErSky9x. The board has it already installed and communicates automatically with the existing 9x main board.
Please go to the instructions and read carefully to make sure you installed correctly:
http://smartieparts.com/shop/index.php? ... cts_id=378
All you do is install the board and turn on the transmitter. No separate programmer is used. The radio can be connected to EepSkye on a computer with a MiniUSB cable.
If you need help, you MUST tell us clearly what you have done step by step in logical order.
Please go to the instructions and read carefully to make sure you installed correctly:
http://smartieparts.com/shop/index.php? ... cts_id=378
All you do is install the board and turn on the transmitter. No separate programmer is used. The radio can be connected to EepSkye on a computer with a MiniUSB cable.
If you need help, you MUST tell us clearly what you have done step by step in logical order.
Re: Trouble connecting to controller
You're again mixing everything. OpenTX and ersky9x are completely different things, and OpenTX doesn't even support the 9Xtreme at this point so just forget about it.silversurfer48 wrote:know can I use opentx if I upgrade my 9xtreme board with skyeepe
- silversurfer48
- Posts: 88
- Joined: Fri Feb 26, 2016 7:00 am
- Country: United States
- Location: Los Angelas Ca
- Contact:
Re: Trouble connecting to controller
companion9x is what Im referring to
- silversurfer48
- Posts: 88
- Joined: Fri Feb 26, 2016 7:00 am
- Country: United States
- Location: Los Angelas Ca
- Contact:
Re: Trouble connecting to controller
its all clear. you answered the question er9x uses eepe and skyer9x uses skyeepe ,right? know can I use opentx if I upgrade my 9xtreme board with skyeepe
this software is not allowing me to splash screen a new screen and on companion 9x it does
this software is not allowing me to splash screen a new screen and on companion 9x it does
- silversurfer48
- Posts: 88
- Joined: Fri Feb 26, 2016 7:00 am
- Country: United States
- Location: Los Angelas Ca
- Contact:
Re: Trouble connecting to controller
did you catch what Im trying to say the skyeepe does not allow me to change or install new splash screen Know when I use the companion 9x it allows me to change screens.In other words works for my TX and then again thats all I can use with the companion 9x
Re: Trouble connecting to controller
You cannot use any version of companion9x or OpenTX with your 9xtreme, period.
And eepskye totally lets you change your splash screen.
And eepskye totally lets you change your splash screen.
- silversurfer48
- Posts: 88
- Joined: Fri Feb 26, 2016 7:00 am
- Country: United States
- Location: Los Angelas Ca
- Contact:
Re: Trouble connecting to controller
how do you make that happen I have done everything to make it work but it dosent
Re: Trouble connecting to controller
you can see it in the picture. click "Help" and then "Customize Splash Screen"
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
-
- Posts: 1844
- Joined: Tue Dec 27, 2011 8:22 pm
- Country: -
- Location: Ottawa
Re: Trouble connecting to controller
The 9XR Pro manual "Using EepSkye Program" explains it. It's near the end.
You can find the manual at
viewtopic.php?f=123&t=5581
You can find the manual at
viewtopic.php?f=123&t=5581
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: Trouble connecting to controller
Also see here for more 9Xtreme info: (viewtopic.php?f=95&t=7182).
You need eepSkye on your PC which works with erSky9x which is the firmware on your 9Xtreme radio.
Are you able to find eepSkye on you PC ?
Not eepe or skyeepe !
Bob B.
You need eepSkye on your PC which works with erSky9x which is the firmware on your 9Xtreme radio.
Are you able to find eepSkye on you PC ?
Not eepe or skyeepe !
Bob B.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
- silversurfer48
- Posts: 88
- Joined: Fri Feb 26, 2016 7:00 am
- Country: United States
- Location: Los Angelas Ca
- Contact:
Re: Trouble connecting to controller
yes I have eepesky but when I pull pic to splash box what then
- silversurfer48
- Posts: 88
- Joined: Fri Feb 26, 2016 7:00 am
- Country: United States
- Location: Los Angelas Ca
- Contact:
Re: Trouble connecting to controller
ok how do I flash to TX there are hisno instruction show or telling me how to do t
- silversurfer48
- Posts: 88
- Joined: Fri Feb 26, 2016 7:00 am
- Country: United States
- Location: Los Angelas Ca
- Contact:
Re: Trouble connecting to controller
Re: Trouble connecting to controller
Postby jhsa » Sat Mar 19, 2016 11:52 am
you can see it in the picture. click "Help" and then "Customize Splash Screen"
JoãoIm
OK I go to help the the splash box opens I pull the pic out of my Doc and the pic shows on splash box now were do I go to flash the pic to my TX
Postby jhsa » Sat Mar 19, 2016 11:52 am
you can see it in the picture. click "Help" and then "Customize Splash Screen"
JoãoIm
OK I go to help the the splash box opens I pull the pic out of my Doc and the pic shows on splash box now were do I go to flash the pic to my TX
-
- Posts: 1844
- Joined: Tue Dec 27, 2011 8:22 pm
- Country: -
- Location: Ottawa
Trouble connecting to controller
Did you read the relevant section of the EePSkye manual I linked to above? See pages 15 and 16. It explains how to edit or replace the image embedded in the ErSky9x file.
- silversurfer48
- Posts: 88
- Joined: Fri Feb 26, 2016 7:00 am
- Country: United States
- Location: Los Angelas Ca
- Contact:
Re: Trouble connecting to controller
ok well I guess I did see anything in the manual explaining how to change the splash screen
- silversurfer48
- Posts: 88
- Joined: Fri Feb 26, 2016 7:00 am
- Country: United States
- Location: Los Angelas Ca
- Contact:
Re: Trouble connecting to controller
I did not read nothing tell me how to change splash on TX on page 15 & 16
Re: Trouble connecting to controller
The instructions on page 16 couldn't be more clear. You can even ignore the last paragaph on page 15, it's redundant...
-
- Posts: 1844
- Joined: Tue Dec 27, 2011 8:22 pm
- Country: -
- Location: Ottawa
Trouble connecting to controller
Are you sure you are looking at the right manual?silversurfer48 wrote:I did not read nothing tell me how to change splash on TX on page 15 & 16
viewtopic.php?f=123&t=5581
There is a series of manuals on various topics related to the 9XR Pro and ErSky9x. The one you want is called:
"Using Eepskye Program".
Go to page 16.
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: Trouble connecting to controller
Video instructions to flash the ersky9x firmware to the radio using eePSkye
and how to backup the eeprom and burn it back to your radio and how to set
Splash Screen: (https://www.youtube.com/watch?v=Zwy6JHyY0hE).
Bob B.
and how to backup the eeprom and burn it back to your radio and how to set
Splash Screen: (https://www.youtube.com/watch?v=Zwy6JHyY0hE).
Bob B.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).