openrcforums

Ok, sorted, silly me made the assumption I had to use the Bind button on the module and not that one on the Protocols page!
Think I need a pair of Boxing gloves to stop me playing around with this stuff!!!!! ;-D)

ok, thanks Mike, i'll post there later today!

ok, tried that, both booting the rx before and after booting the tx, both give rapid flashesas per bind, but they do not.

ok, so where would I find the sub protocol and yes to the rx!

yeap got that situation!

Ok, with another laptop I get the connecting sound, and having changed the protocol to ppm yes, the red and green leds are solid

In the tx , get solid green and rapid flash red which drops to about 1/2 original rate.
When out of tx and connected just get green solid --- hsve also tried several usb leads all to no avail!

Ok, trying to use the unit in a 9XR, flashed with ER9X and V2 std 8 chan flysky et al receiver New model slected in 9XR model setup, protocol, loaded Flysky and second flysky tried all the options would not bind. Just tried usb with the unit as stand alone. not recognised in USB listings also tried ...

Ok, so tried configuring the unit, no success, I've tried looking for a manual on the web, no luck, anyone got a web address to find one
Ta!!

yes it does, i'll have a look later, got to be somewhere this afternoon!
thanks

Ok now acquired one of the above, I have searched on here for info of how to flash it etc with Flysky/Turnigy firmware, I think I need to use multiprotocol etc, anyone point me in the right direction or give me simple instructions please?

Quick question, got the above transmitter, I have an opportunity to buy some Spectrum receivers, anyone know if the Tx will work with these receivers before I buy, can't try them as they are some distance from me!
Its a DSM2/DSMX module!!

Thanks for the info Mike,and , will the 2 modules recommended for the 9X work in the XR Pro? been away from my laptop all day so no opportunity to do some research

Ok, so that works, must have been a corrupted file I used! The 9X now works with a now defunct 9x V2 module and RX it will not work with a later module and an IA6 rx even when changing polarity! I have a 9XR tx which has the original eeprom file and has been flashed with the same French language fil...

ok, i'll try that tomorrow
thanks

Ok, installed an old motherboard, had Flysky 9X running, flashed it wit M64, got eprom error message,, reflashed with the new TGY FIRMWARE AND THE EPROM INFO, downloaded from a a new Tgy system, that runs fine, then tried to flash M64 French version, again eprom error, so back to new Tgy pieces. I w...

hi all trying to flash a 9x, keep getting the print below is the tx bricked? ================================================================================= Started AVRDUDE C:/Program Files (x86)/eePe/avrdude.exe -c usbasp -p m64 -P usb -U flash:w:C:\Users\Tony\Desktop\ER9X\er9x.hex:i ============...

So, should this pos to neg or vice versa work with a 9XR Pro using a V2 receiver? ie so it would work with 2A receivers? I am currently rebuilding said Pro so cannot check at the moment! Having thought about it, to use later 2A receivers I would need a FM003 module installed and the earlier receiver...

Ok, tried the boat yesterday with just the curve applied and a manualswitch, excellent!! Last night I had a fiddle with the switch function , initially without success but eventually the penny dropped and using logic I solved the auto switching, again excellent!! Many thanks for the assistance Mike,...

Ok, thanks for the info, however being an absolute dimbo, this is all a bit like black magic, I can do and achieve simple 'stuff' but how would I do

L1 Thr<0

I have had a look at Logical switches , but how to configure 'em'!!
Thanks

Hi Mike Configured the curve option here on the bench, yes that works for me, I'll take it up the pond saturday and give it a whizz! Just another thought, can the gear switch function be tied in to work with the throttle, ie reverse stick movement to change the gear, or in my case the gate baffle au...

Hi all, I have a model zodiac with an in board jet drive unit, I have the gear switch controlling a diverter gate in the jet drive to achieve reverse.To use the reverse function I need to switch the diverter plate so water is pushed out under the model towards thfront making the zodiac go backwards ...

oscillascope, don't know, maybe someone else with more knowledge will join the conversation. With regard to the operationof the 9x's, a modern transmitter will not work with an old V2 receiver, only with a AFHDS 2A receiver and an old transmitter will not work with a modern 2a type receiver, this ha...

Hi there When did you replace them/board? if recently, it may have modern programming which will not 'talk' to receivers using an old transmitter module -- I have had problems with a new transmitter being reprogrammed with ER9X binding with receivers both old and new, but not actually controlling th...

Hi all In a vain hope someone might be able to help me, anyone got an old non working gimball they could sell me, I have one which no longer works , and before spending time with it the above question!! If not, suggestions for an esy fit replacement, nothing fancy, as the tx is used to control boats...

ok, you could use an orange module and receiver, how many channels do you want to work with?

Ok, the 2 9X's have arrived, tried the IA8 receivers with an original 9XR transmitter, and yes both work with th 9XR running original software! The tx had a later module installed.
Anybody got an explanation?
Also any thoughts on how to reverse flash the tx from er9x back to original? Is it possible?

Ok, I have 2 x modules here, both work with the above receiver using the 9XR with as supplied original software, a Flysky 2.4ghzAFHDS 2A module , FS-RM0003 module a Turnigy 9X Native 2.4ghz FCC ID N4ZRM00300 I suspect the same pcbs, just different external boxes! The latter was originally fitted in ...

Ok, tried that, spectacularly unsuccessful, flashed tgy9xr firmware first then eeprom, disconnected cable, rebooted the piece, blank screen, pushed buttons , no response, so just reflashed er9x and we are back working, am I missing something? I am wanting to reinstall the original firmware as it wil...

Hi all
about to reflash the original software back onto a 9XR, I assume it can be done, but what order, eeprom or firmware first?
Thanks in advance