Search found 62 matches
- Sat Mar 26, 2016 9:27 pm
- Forum: Feedback
- Topic: non technical beginner
- Replies: 13
- Views: 16858
Re: non technical beginner
I wish to make a sincere apology to this forum for my mis-guided comments. I do understand the amount of work put in by people who volunteer to do this work on our behalf. My comments were said in haste with no thought for the feelings of these volunteers. As said in my previous comments, I have rec...
- Fri Mar 25, 2016 12:24 am
- Forum: Feedback
- Topic: non technical beginner
- Replies: 13
- Views: 16858
Re: non technical beginner
I was grateful for the reply from Mike B, and have been grateful for his help in the past. However maybe our interpretation of the feedback is different. It would appear that I may have over reacted to a lack of response but having read a number of unanswered posts on the forum, there is definitely ...
- Thu Mar 24, 2016 10:38 pm
- Forum: Feedback
- Topic: non technical beginner
- Replies: 13
- Views: 16858
Re: non technical beginner
This forum page is for feedback, which I have given.
As I no longer have a usable taranis because of the inability of the forum to cater for the uninitiated in the complexities of opentx, perhaps you would kindly remove me from your forum!!
As I no longer have a usable taranis because of the inability of the forum to cater for the uninitiated in the complexities of opentx, perhaps you would kindly remove me from your forum!!
- Wed Mar 23, 2016 11:44 pm
- Forum: General help (FrSky Taranis radio)
- Topic: Latest opentx firmware
- Replies: 3
- Views: 3364
Re: Latest opentx firmware
Thanks for the reply. It has explained in the main my concern.
Soco
Soco
- Wed Mar 23, 2016 10:37 pm
- Forum: Feedback
- Topic: non technical beginner
- Replies: 13
- Views: 16858
non technical beginner
As a keen Taranis owner and and an enthusiastic user of opentx, i am very disappointed that a request for assistance from myself has fallen on deaf ears or perhaps people consider it below them to answer what to them is probably a very simple solution. I would have thought that it is in the interest...
- Mon Mar 21, 2016 5:07 pm
- Forum: General help (FrSky Taranis radio)
- Topic: Latest opentx firmware
- Replies: 3
- Views: 3364
Re: Latest opentx firmware
My apologies for the repeated topic
- Mon Mar 21, 2016 5:02 pm
- Forum: General help (FrSky Taranis radio)
- Topic: Latest opentx firmware
- Replies: 3
- Views: 3364
Latest opentx firmware
I would like to upgrade my Taranis plus with the latest firmware, however having read all the info regarding eu regulations and range issues etc. I am left confused, so seeking some un technical help. I have a taranis plus purchased mid 2015. Firmware is 2.0.15. Receivers I use are the D series and ...
- Tue May 05, 2015 8:39 am
- Forum: Software
- Topic: companiontx
- Replies: 4
- Views: 3492
Re: companiontx
Thanks Mike
- Mon May 04, 2015 4:49 pm
- Forum: Software
- Topic: companiontx
- Replies: 4
- Views: 3492
companiontx
Hi
I have just installed the latest companiontx (version 2.0.16). However when I try to simulate a model the program freezes and then closes.
Is this a fault with this version or am I doing something wrong?
Many thanks
I have just installed the latest companiontx (version 2.0.16). However when I try to simulate a model the program freezes and then closes.
Is this a fault with this version or am I doing something wrong?
Many thanks
- Sat Apr 25, 2015 5:57 pm
- Forum: General help (FrSky Taranis radio)
- Topic: FAI box
- Replies: 2
- Views: 2556
Re: FAI box
Kilrah
Many thanks
soco
Many thanks
soco
- Sat Apr 25, 2015 10:05 am
- Forum: General help (FrSky Taranis radio)
- Topic: FAI box
- Replies: 2
- Views: 2556
FAI box
Hi again I inadvertently ticked the FAI box and then switched my taranis off, which meant that it then dissapeared from my transmitter. The instructions said that I needed to reset it from my PC using opentx companion. However have tried to do that but without success! Any help would be appreciated....
- Sat Apr 25, 2015 9:42 am
- Forum: General help (FrSky Taranis radio)
- Topic: New sounds
- Replies: 2
- Views: 2664
Re: New sounds
Jim
Thanks for that, the problem was just the length of the file names, so simple!
soco
Thanks for that, the problem was just the length of the file names, so simple!
soco
- Fri Apr 24, 2015 8:41 pm
- Forum: General help (FrSky Taranis radio)
- Topic: New sounds
- Replies: 2
- Views: 2664
New sounds
Hi my taranis plus is running firmware open tx version 2.0.15 Need some custom sounds for 2 switches. I have produced these sounds as per video instructions. All the sounds are on my sd card, however when I try to use them on special functions menu the new sounds do not appear although the original ...
- Fri Apr 24, 2015 8:31 am
- Forum: Software
- Topic: Taranis plus
- Replies: 4
- Views: 3659
Re: Taranis plus
Hi again
Yes it would be far better if I had not tried to rush things and followed the video instructions properly! As you say Mike the menu is called inputs, and quite easy to understand.
soco
Yes it would be far better if I had not tried to rush things and followed the video instructions properly! As you say Mike the menu is called inputs, and quite easy to understand.
soco
- Fri Apr 24, 2015 7:39 am
- Forum: Software
- Topic: Taranis plus
- Replies: 4
- Views: 3659
Re: Taranis plus
hi
As a follow on from my previous post, all instructions for dual rates and expo refer to the sticks menu, however that appears to be missing from the version I have.
Soco
As a follow on from my previous post, all instructions for dual rates and expo refer to the sticks menu, however that appears to be missing from the version I have.
Soco
- Thu Apr 23, 2015 9:34 pm
- Forum: Software
- Topic: Taranis plus
- Replies: 4
- Views: 3659
Taranis plus
Hi all
Just received my new Taranis plus. Have downloaded the latest Open TX firmware, version 2.0.15.
My first model I wanted to put some expo and dual rates on elevator a rudder but cannot find out how to proceed. Any help please.
Soco
Just received my new Taranis plus. Have downloaded the latest Open TX firmware, version 2.0.15.
My first model I wanted to put some expo and dual rates on elevator a rudder but cannot find out how to proceed. Any help please.
Soco
- Thu Apr 09, 2015 4:43 pm
- Forum: Software
- Topic: er9x ownload
- Replies: 1
- Views: 2145
er9x ownload
Hi all
Have just opened eepe on my computer and it told me there was a new version etc. Decided to download it but unable to do so, after numerous attempts using different methods it appears I need a version for 64 bit windows.
Can anyone point me in the right direction for this file.
Many thanks
Have just opened eepe on my computer and it told me there was a new version etc. Decided to download it but unable to do so, after numerous attempts using different methods it appears I need a version for 64 bit windows.
Can anyone point me in the right direction for this file.
Many thanks
- Thu Apr 02, 2015 3:25 pm
- Forum: er9x / gruvin9x / th9 based firmwares
- Topic: Throttle cut
- Replies: 19
- Views: 11989
Re: Throttle cut
Joao
Just one simple final question, where can I find the latest firmware update?
Soco
Just one simple final question, where can I find the latest firmware update?
Soco
- Thu Apr 02, 2015 3:02 pm
- Forum: er9x / gruvin9x / th9 based firmwares
- Topic: Throttle cut
- Replies: 19
- Views: 11989
Re: Throttle cut
Joao
With just a few very minor adjustments every thing is working perfectly.
I must give you my grateful thanks for your help and instruction.
Soco
With just a few very minor adjustments every thing is working perfectly.
I must give you my grateful thanks for your help and instruction.
Soco
- Thu Apr 02, 2015 1:58 pm
- Forum: er9x / gruvin9x / th9 based firmwares
- Topic: Throttle cut
- Replies: 19
- Views: 11989
Re: Throttle cut
Yes I only want spoilerons, what I have done on my transmitter is to use some offset to counter the flaperons.
Hope I have explain that ok
Hope I have explain that ok
- Thu Apr 02, 2015 1:54 pm
- Forum: er9x / gruvin9x / th9 based firmwares
- Topic: Throttle cut
- Replies: 19
- Views: 11989
Re: Throttle cut
Joao short answer is yes it is my intention to add some differential, the file I sent you has only been done on epee, therefore is very basic. I have seen in the mix that as you say differential can be added through curve. Maybe what I should do is flash the model from my transmitter so that you can...
- Thu Apr 02, 2015 1:32 pm
- Forum: er9x / gruvin9x / th9 based firmwares
- Topic: Throttle cut
- Replies: 19
- Views: 11989
Re: Throttle cut
hope this is correct
- Thu Apr 02, 2015 1:01 pm
- Forum: er9x / gruvin9x / th9 based firmwares
- Topic: Throttle cut
- Replies: 19
- Views: 11989
Re: Throttle cut
Never posted a file here, do I just cut and paste it or is there another way?
- Thu Apr 02, 2015 12:23 pm
- Forum: er9x / gruvin9x / th9 based firmwares
- Topic: Throttle cut
- Replies: 19
- Views: 11989
Re: Throttle cut
Yes I did that part of the mix I did understand. There is still a small problem, the ailerons still operate until the stick goes past halfway, at that point they no longer operate. I assume its because the spoilerons (ailerons) are at their limit, is there a way of solving that?
Soco
Soco
- Thu Apr 02, 2015 12:04 pm
- Forum: er9x / gruvin9x / th9 based firmwares
- Topic: Throttle cut
- Replies: 19
- Views: 11989
Re: Throttle cut
Hi Joao
my apologies, I had it at +100% rather than -100%. It now works.
Many thanks for your help
Soco
my apologies, I had it at +100% rather than -100%. It now works.
Many thanks for your help
Soco
- Thu Apr 02, 2015 11:31 am
- Forum: er9x / gruvin9x / th9 based firmwares
- Topic: Throttle cut
- Replies: 19
- Views: 11989
Re: Throttle cut
Hi Joao
Tried as you suggested but unfortunately the motor ran at full revs when spileron was switches on.
Soco
Tried as you suggested but unfortunately the motor ran at full revs when spileron was switches on.
Soco
- Thu Apr 02, 2015 9:26 am
- Forum: er9x / gruvin9x / th9 based firmwares
- Topic: Throttle cut
- Replies: 19
- Views: 11989
Throttle cut
Hi all
I have a turnigy 9xr using er9x firmware.
I am trying to get a mix that will be able to use my throttle stick to operate spoilerons without the motor also running,
Any help would be much appreciated.
Soco
I have a turnigy 9xr using er9x firmware.
I am trying to get a mix that will be able to use my throttle stick to operate spoilerons without the motor also running,
Any help would be much appreciated.
Soco
- Mon Feb 23, 2015 7:09 pm
- Forum: Template Library
- Topic: Crow brakes
- Replies: 8
- Views: 8955
Re: Crow brakes
Mike
Have just attached 4 separate servos and things seem ok, so I can only assume that one of the servos in the wings is faulty.
Hopefully I will now be able to work out how to get crow to work correctly. The videos by Richard Mrazek I have found to be very useful.
Soco
Have just attached 4 separate servos and things seem ok, so I can only assume that one of the servos in the wings is faulty.
Hopefully I will now be able to work out how to get crow to work correctly. The videos by Richard Mrazek I have found to be very useful.
Soco
- Mon Feb 23, 2015 5:22 pm
- Forum: Template Library
- Topic: Crow brakes
- Replies: 8
- Views: 8955
Re: Crow brakes
Mike Hope you can help with regards to previous posts about crow brakes. Although I thought I had sorted it out at the time I was only using one wing, therefore 2 servos. As soon as I have included connections to the other wing the sevos operate on their own jittering and moving in different directi...
- Mon Feb 02, 2015 10:19 pm
- Forum: Template Library
- Topic: Crow brakes
- Replies: 8
- Views: 8955
Re: Crow brakes
Thanks Mike have sorted ir.
Many thanks
soco
Many thanks
soco