Search found 10682 matches
- Tue Sep 06, 2022 9:38 am
- Forum: openTx
- Topic: Upgrader to 2.3.15 on a D9XSE-2019
- Replies: 6
- Views: 3000
Re: Upgrader to 2.3.15 on a D9XSE-2019
With the trims held in you're doing a short press of the power button and not a long one, right?
- Tue Aug 30, 2022 10:02 pm
- Forum: openTx
- Topic: 2nd RC, 1st OpenTX
- Replies: 63
- Views: 23605
Re: 2nd RC, 1st OpenTX
We know you've been doing that... but you're having issues, which can be understood from the way you've gotten there, and we're advising you on how to go about avoiding to get into that situation. You're obviously not interested in learning how it actually works or what are the good practices, so......
- Tue Aug 30, 2022 9:43 pm
- Forum: openTx
- Topic: 2nd RC, 1st OpenTX
- Replies: 63
- Views: 23605
Re: 2nd RC, 1st OpenTX
Making a global change in inputs or outputs would effect how all the flight modes operate. Why would I want to do that? Am I missing something? Now yes, that's why you'd want to adjust outputs first thing before setting up anything else to "calibrate" each servo's center and travel ranges...
- Tue Aug 30, 2022 8:00 pm
- Forum: openTx
- Topic: 2nd RC, 1st OpenTX
- Replies: 63
- Views: 23605
Re: 2nd RC, 1st OpenTX
Ideally: - How the response to a control input should be in inputs - How channels should ideally relate to each other in Mixes - Adjustments to take account of mechanical differences in outputs That way things are separated by intent and most things you'd need to tweak are restricted to only one of ...
- Tue Aug 30, 2022 10:22 am
- Forum: openTx
- Topic: 2nd RC, 1st OpenTX
- Replies: 63
- Views: 23605
Re: 2nd RC, 1st OpenTX
You would adjust servo/linkage-specific things on the outputs page so as to separate this aspect from the mixes, you want those the same.
- Tue Aug 23, 2022 8:03 am
- Forum: Hardware
- Topic: 18650 3.7v batteries
- Replies: 5
- Views: 3379
Re: 18650 3.7v batteries
That's all perfectly normal. Drop is pretty quick to 3.7V/cell nominal around which it'll spend a good ~80% of the time to discharge.
- Mon Aug 22, 2022 6:28 pm
- Forum: Hardware
- Topic: 18650 3.7v batteries
- Replies: 5
- Views: 3379
- Thu Aug 18, 2022 2:36 pm
- Forum: openTx
- Topic: OpenTx PPM Center
- Replies: 1
- Views: 893
Re: OpenTx PPM Center
That's handled at protocol level so it's likely a specificity of freedomTX/the code they wrote to talk to their module not implementing it.
- Thu Aug 18, 2022 2:35 pm
- Forum: openTx model setup
- Topic: Variable Rates with 2 Elevator Servos not working
- Replies: 1
- Views: 4551
Re: Variable Rates with 2 Elevator Servos not working
It's not the input you want to duplicate, inputs are not tied to channels.
It's the mixer lines you have on CH2 you want to copy to CH6.
It's the mixer lines you have on CH2 you want to copy to CH6.
- Tue Aug 16, 2022 8:27 am
- Forum: Software
- Topic: Radiomaster 16s no Models on Companion
- Replies: 1
- Views: 2635
Re: Radiomaster 16s no Models on Companion
If you have touchscreen used then your radio is running EdgeTX, not OpenTX so you need to use EdgeTX tools.
- Wed Aug 03, 2022 6:28 am
- Forum: Software
- Topic: Firmware update trouble from 2.2.1 to current
- Replies: 1
- Views: 2438
Re: Firmware update trouble from 2.2.1 to current
If it has stock FrSky firmware make sure to select the correct radio type in companion and disable the compatibility check.
- Thu Jul 28, 2022 7:38 am
- Forum: General help (FrSky Taranis radio)
- Topic: Hand launch a glider and telemetry lost
- Replies: 6
- Views: 3828
Re: Hand launch a glider and telemetry lost
That's usually how it is, and is easy enough to test...
- Wed Jul 27, 2022 7:30 pm
- Forum: General help (FrSky Taranis radio)
- Topic: Hand launch a glider and telemetry lost
- Replies: 6
- Views: 3828
Re: Hand launch a glider and telemetry lost
Telemetry is not control, you don't exactly need it.
- Tue Jul 26, 2022 2:05 pm
- Forum: FrSky Taranis radio
- Topic: Taranis X9D (2014) after update LCD is dead.
- Replies: 2
- Views: 3713
Re: Taranis X9D (2014) after update LCD is dead.
You probably chose firmware for X9D+ instead of X9D.
- Fri Jul 22, 2022 9:48 pm
- Forum: Hardware
- Topic: Futaba xjt Module
- Replies: 1
- Views: 2656
Re: Futaba xjt Module
If it works it works, if not you may need to try fiddling with the values until you find something that does...
- Tue Jul 19, 2022 6:09 pm
- Forum: openTx
- Topic: 2nd RC, 1st OpenTX
- Replies: 63
- Views: 23605
Re: 2nd RC, 1st OpenTX
Your copies are on the same channels as the originals, not on those you're going to connect your servos to, you probably want 5 and 6.
Outputs will need their own adjustments based on your servos/linkages to match both ailerons' centering and throws.
Outputs will need their own adjustments based on your servos/linkages to match both ailerons' centering and throws.
- Tue Jul 19, 2022 9:54 am
- Forum: openTx
- Topic: 2nd RC, 1st OpenTX
- Replies: 63
- Views: 23605
Re: 2nd RC, 1st OpenTX
You can copy a line by long pressing enter on it, choose copy, then scroll it to where you want it.
- Mon Jul 18, 2022 9:05 pm
- Forum: openTx
- Topic: 2nd RC, 1st OpenTX
- Replies: 63
- Views: 23605
Re: 2nd RC, 1st OpenTX
You don't change anything in Inputs, and in Mixer you copy the line of the first channel onto the 2nd.
- Mon Jul 04, 2022 6:35 pm
- Forum: General help (FrSky Taranis radio)
- Topic: cant find firmware folder on sd card
- Replies: 8
- Views: 4137
Re: cant find firmware folder on sd card
Receiver/module firmware don't even need to be in a FIRMWARE folder, they can be anywhere on the card. It's only radio firmware that you want to be able to flash from the bootloader that needs to be there.
- Sun Jun 12, 2022 10:57 am
- Forum: General RC Electronic Projects and Discussion
- Topic: Problems with FPort byte stuffing
- Replies: 4
- Views: 3069
- Sun Jun 12, 2022 5:13 am
- Forum: Hardware
- Topic: Horus x10s permanantly thinks its plugged in to USB
- Replies: 2
- Views: 3140
Re: Horus x10s permanantly thinks its plugged in to USB
Likely hardware, the USB connection is detected by the 5V from the computer being present on the relevant pin. Might be a short / screwed up connection inside.
- Sat Jun 11, 2022 6:59 am
- Forum: Hardware
- Topic: Jumper T12 3 Position switch wont work
- Replies: 4
- Views: 4548
Re: Jumper T12 3 Position switch wont work
The screen reads 100, 0, -100 as I flip through the switch. If the channel monitor does show this then the radio correctly puts out 3 positions and you need to look elsewhere, either ELRS or the flight controller. Note that ELRS only supports 2 positions on some channels depending on configuration ...
- Fri Jun 10, 2022 8:45 am
- Forum: openTx
- Topic: Opentx 2.3.15 on X9D+ not being detected.
- Replies: 1
- Views: 1081
Re: Opentx 2.3.15 on X9D+ not being detected.
Is the radio powered up in bootloader mode/trims in?
Do NOT use Zadig in that mode.
Do NOT use Zadig in that mode.
- Sat Jun 04, 2022 7:02 pm
- Forum: Hardware
- Topic: Frsky QX7 not keeping the time anymore after power shutdown.
- Replies: 3
- Views: 2823
Re: Frsky QX7 not keeping the time anymore after power shutdown.
The RTC is in the main processor, no separate chip or external communication.
- Fri May 20, 2022 10:25 am
- Forum: Hardware
- Topic: About FlySky Frm302
- Replies: 2
- Views: 3113
Re: About FlySky Frm302
Show what you get with OpenTX 2.3.15, when switching to AFHDS3 you should see Module status quickly going from "Not Ready" to "Connecting" as it powers up. I tried with 2 TX16Ss with OpenTX 2.3.15 and it's fine on both. Tried ETX 2.7.1 on one of them and it never moved from "...
- Mon May 02, 2022 8:54 pm
- Forum: openTx for FrSky radios
- Topic: Frsky X9D firmware
- Replies: 3
- Views: 3882
Re: Frsky X9D firmware
Current one.
- Sun May 01, 2022 12:05 pm
- Forum: openTx
- Topic: Read out value on S2
- Replies: 4
- Views: 1551
Re: Read out value on S2
Special Function, choose switch you want to use to play the value, Play Value, S2
- Tue Apr 26, 2022 10:10 pm
- Forum: General help (FrSky Taranis radio)
- Topic: Frsky R8 PRO receiver AIN2 port not working?
- Replies: 14
- Views: 13770
Re: Frsky R8 PRO receiver AIN2 port not working?
If you want all cells you need a separate sensor like the FLVSS.
- Thu Apr 21, 2022 9:35 am
- Forum: General help (FrSky Taranis radio)
- Topic: Frsky R8 PRO receiver AIN2 port not working?
- Replies: 14
- Views: 13770
Re: Frsky R8 PRO receiver AIN2 port not working?
Ratio should be "the max measurable value" so yes 36. Never had one of those receivers but if they do it the same as the older ones the fact they've put a 1/10 divider would lead to terrible resolution/precision so wouldn't be worth more than a ballpark (36V as 256 steps = 0.14V / step, no...
- Sun Apr 10, 2022 8:20 pm
- Forum: openTx for FrSky radios
- Topic: RACE MODE for Archer RS receiver
- Replies: 2
- Views: 5173
Re: RACE MODE for Archer RS receiver
You register with the button, then bind just by powering up without pressing the button.