openrcforums

Kilrah wrote: ↑Wed Apr 22, 2020 2:59 pm Maybe the bootloader is incorrect or didn't flash?

I used the file linked on this thread, maybe the file is wrong but it definitely flashed the bootloader :/

Don't know, all I could find is I used my FTDI. Don't remember if this pic was of flashing the bootloader or the firmware. 20170912_173502.jpg Those are the rx and tx pads it's connected too so that will be the firmware and not the bootloader. I have mine wired exactly the same but the serial boot ...

No, once the bootloader is on flashing the firmware is done using the normal TX/RX pads, that's the bootloader's job. ok, i finally found the information i need, DD and DC are on pins P21 (DD) and P22 (DC) and ive successfully flashed the bootloader but i cannot get the Blemodule.bin firmware file ...

No, once the bootloader is on flahsing the firmware is done using the normal TX/RX pads, that's the bootloader's job. Kilrah, i wonder if you can help me please. After the first module failed to arrive and i got a refund, i ordered from a different seller and finally after months i have at last got...

No, once the bootloader is on flahsing the firmware is done using the normal TX/RX pads, that's the bootloader's job. Thankyou, so being on the RX/TX pads its a regular UART dongle I need to use then, nice and simple :) I take it that the supplied program for flashing the firmware kicks the module ...

Another question sorry :/ I don't like to just ask and ask so I try my best to research solutions and I know that the bootloader flashing via arduino is done using the debug pads on the module and I know what pads are used but the next step is where I'm unsure. When it comes to flashing the actual f...

The zip in the post you quoted has a firmware that FrSky posted at one point very long ago. Not sure if it has changed afterwards. Ty for your reply. So I'm right in thinking that it is a horus based firmware for the Bluetooth module, but a very old one? As far as I'm aware, it's age does not matte...

Is anyone able to help? I've done extensive searching and this is the only place over found the module firmware discussed!

Here are files attached, you need to use this to program an arduino with and load the bootloader: https://github.com/RedBearLab/CCLoader Then use TI's SerialBootTool to flash firmware: http://processors.wiki.ti.com/index.php/File:SerialBootTool_1_3_2.zip Hi all, I've ended up here in my quest to pu...